Search results

What exactly do you mean? As stated, the FC of the WKM will control a two axis gimbal and will keep the camera level and tilted,mans allow the pilot tilt control of the gimbal. What more are you asking out of the flight computer? iI you are wanting an Alexmos type of brushless gimbal...

The dealers are the ones that work with DJI on replacements, so you would need to talk to your dealers. Mine has already replaced two of my malfunctioning pieces. But you have to prove it is not operator error or build error.

mossb, if you are only using a 2 axis gimbal, there is no need for a separate receiver/transmitter. The WKM already has two outputs you can feed into the roll and pitch inputs of the gimbal. However, as stated above, if the gimbal has its own stabilization controller, then you will need to wire...

I personally tend to see things the way Olof described. No matter what the technology area, those that drive the technology are always "innovating" and changing things in an attempt to make it better. Those of us that use those technologies before they changed get frustrated when they change...

lol! That's the awesome part of this forum, that collectively we all have some serious knowledge and experience.

Just to expand on what Dean said… You should have IOC turned off for normal flying so that the nose always is motion forward orientation. The two IOC modes allow you to point the nose to where you want, and fly in any direction you wish. For example, you could use Course mode on the football...

So you have two Wookongs and it is ONLY the newer one that is giving you problems with v5.24? Did you just buy it? Can you contact your vendor and see if they can replace it? As far as trouble shooting, have you tried putting the GPS compass that works with the Wookong that isn't working, and...

Barreto, sorry for your frustration. But for starters, the two things you are dealing with are unrelated. In your assistant software the firmware version you are looking at is not the IMU, but the Main Controller. Under v.202 of the Software Assistant, I believe it is by design that you only...

Barreto, have you read the manual for the new firmware 5.24? It appears you are referring to two problems: 1) Yellow-Green LED sequence: this is a new LED blinking sequence for 5.24 which simply "abnormal compass data". Being that you are doing this in your room with all sorts of objects...

Sadly, not as of yet. Pretty much you have to put the GoPro in the recording mode of your choice (time lapse photo, or video, or combo of both) while on the ground, then take off, and live with what it comes back with. :D I am hoping DJI is thinking of enabling this, but I haven't read any...

Interesting the difference in behavior. I wonder if it's a function of gimbal SW version or GoPro software version... or neither... But when I power on my MR/gimbal, definitely the red light blinks, but the screen stays off and I have to hit the power button first. :(

Tim, it is quite important that the gimbal be properly balanced and free to spin. This is because brushless servos shouldn't be strained to keep the camera balanced... it shortens the life of them from what I understand. Are you saying it is out of balance with the camera installed? If it's...

Paktazh, sorry, nothing is standing out to me other than the usual precautions and checks we all have to make. Plus, the link you provided does not have a video available. It says it's still in progress. I'll just throw out some thoughts: - Are you sure one of your motors or ESCs didn't go...

I have flown 5.16, 5.22, and 5.24, all on my S800, and did not notice any performance difference.

Hi Nigel. It just turns on the red light, but doesn't power on the camera. I don't think the gimbal powers the camera; at least, if the GoPro battery is dead, it wont' turn on even if connected to a fully powered gimbal.

Never hurts to do it, and it only takes 1 minute. That way you are guaranteed to not have an incident just because of the small inconvenience.

Thanks Pete. I just wasn't sure.

No, no other changes other than the above. But that is an interesting point for me to keep in mind in the future if I add new video transmitters. Yes, I did recalibrate the compass, and I have also checked the COG. Both very good points. I might redo the calibrations again tomorrow. While I...

No worries. Glad we could help and trust your gimbal is all working including tilt! :)

Kloner, pretty sweet! How long did you have to fly for imagery to get to the level of completeness you showed? Was that all in one flight? Or many passes?