Search results

Ken, a friend of mine here in Las Vegas has the same problem with this vTx. I think that he is running 1.3gHz. I don't have the same problem, but I am using 5.8gHz. On my F450 I have two GPS units, the Naza and the EagleTree GPS for the OSD Pro. No interference with either of them.

Sidney from DJI posted gains of 230/230/130/180 and 170/170. I am using them and I am happy with the results. My IMU is at: -6, 0, 0. My GPS is at 1,0,-18 on the tall mast.

Maybe that is your problem, the mast. I de-masted mine on both the F450 FPV Quad and the F550 Hexa. The F450's GPS is mounted on the left rear arm. The F550 is mounted on the top plate between the two front motors. Both locations work well. I did adjust the GPS orientation to reflect my...

You are over propped. Get the 10" props on soon.

I built an MK and an Arducopter with IMU/OilPan. I have a good soldering station to work with and a lot of tips. I haven't had anything that I could not solder yet. But there is always a first time. The order is already gone but since the Core won't be available for a week or two I guess I...

I took the plunge for the TBS top/bottom plates and Core with 69 Camera combo. I am going to use my 5.8gHz Immersion 600mw vTx and my Eagle Tree OSD Pro with GPS and eLogger. I will have a little more space to mount stuff with this frame. I really like the DJI arms. I threw a prop yesterday...

I was flying my F550 today and had a prop fly off! I am using star lock washers. I am not sure how it happened. Recovered the prop and only broke an arm. I have replacements so no big deal it is just odd that it happened.

I am ready to spend about $600 on their products but can't on their website. Very frustrating. Glad that others can get their stuff.

Really nice Kloner. I tried to go onto the TBS website and got a white screen on the Discovery pages. Must be very popular and crashed the server. I will try again later. Keep us informed of your progress.

I am in Las Vegas and my magnetic declination is 12 degrees. I fly my WKM and my Naza GPS pointing straight forward and have not experience TBE. I understand that my experience is not indicative of someone else's. If you are having problems with TBE I would try and rotate the GPS. I had a...

Here is what mine looks like. The solder joint is a little gray vs shiny silver. I know it is non-lead solder so some of that is expected. All my pins are solid. This was one of the first in the US so maybe the QC was better on the earlier models. When I have the time, I will replace the red...

What antennas are you using?

You can use the Z15 WKM combo on any frame up to an Octo. Check out the Z15 manual for connection information. It will also work with an Ace One as well for Heli applications. Singe gimbal for multiple uses.

I fly the stock kit with 2x6S 5000mAh lipos which are 1.8k and I am at 4.65k. If you add your 2.18k you will be at 6.83k which is below the 7k max for the S800.

Dang, 40 minutes too late!

I never knew that. I have been flying on Channel 1 all this time.

Yes they are. I cut myself the first time I installed mine. The original DJI motors came with an anodized washer under the props. The new ones don't. I use them on my F450 FPV quad and star washers on my F550 hex. Works well. They sound different though.

Sidney posted some of the details on RCG about the new version of software for the WKM. http://www.rcgroups.com/forums/showpost.php?p=21926472&postcount=12823 PPM, adjustable servo speed output for gimbal control, "Hot Spot Encircle" DJI's version of MK's POI for waypoints, and a couple more.

Your only issue will be the weight of your copter. You may only get a few extra minutes with the addition of another lipo. You can run the numbers in ecalc.

Denny can you post some pictures. I would really like to see them. Thanks.