Search results

  1. T

    Zenmuse to S800 connection

    Denny, I am waiting for the 2 axis Z15. I am getting 18 min on 2x6S 5000mAh lipos. That is plenty of time for some waypoints. If you are only getting 5-7 mins then I agree what is the point especially with the enhancements with POI and IOC.
  2. T

    Mk or DJI...

    My friend, a pro A/P photographer, had more MK problems on a shoot today. He is beside himself. He has a F450 Naza-GPS that he loves but I can't get him to take the leap to DJI. I have a S800 with WKM and Data Link. With the ZenMuse gimbal video is outstanding, as long as your customer will...
  3. T

    Zenmuse to S800 connection

    The 900mHz Data Link has 2 can bus ports.
  4. T

    Naza acting very strange.

    I know now is your winter, but what are your temps while flying? It could be that your motors are stressed and may need to be replaced. What is your set up? Thanks.
  5. T

    DJI WKM Firmware 5.12 Update

    Test flown 5.12a on my S800, it works, even if you loose a motor. Very solid in 10mph winds with gusts to 14. Just an FYI, so was the F550. With less weight, it just bounced a little.
  6. T

    DJI S800 Product Bulletin - ESC too high temperature

    Have you uninstalled and reinstalled the software? It took me 4 times with GS. The Assistant was seamless.
  7. T

    DJI S800 Product Bulletin - ESC too high temperature

    If you purchased before Jan 2012 then there are problems with the Main Controller. DJI was replacing them with the escs. Mine was replaced.
  8. T

    DJI S800 Product Bulletin - ESC too high temperature

    Make sure you are in english. I had a similar problem with Ground Station. Also if you got the new WKM MU make sure that the new S/N is showing up in the Assistant.
  9. T

    DJI S800 Product Bulletin - ESC too high temperature

    Well the solder joints look ok but I will redo them just to be sure. I may have been imagining this but I thought that there was some moisture in the esc housing. I am not sure. If that were true, it would explain the conformal coating on the original escs. I have some, so I may go back and...
  10. T

    DJI S800 Product Bulletin - ESC too high temperature

    If you want to do it feel free. I am not going there again intentionally. At least I know that it will handle it, if it should happen again. As far as the other crashes go, I don't know how many motors failed, one, two more? More than one you will definitely go down.
  11. T

    DJI S800 Product Bulletin - ESC too high temperature

    I will take the esc apart tonight and post some pictures. I am sure it was my soldering. Someone else had a motor fail because of a cold soldered joint. I suspect the same. I was so in shock that I actually flew it around a little and contemplated getting my iPhone out to video it. It was...
  12. T

    DJI S800 Product Bulletin - ESC too high temperature

    I took my S800 out for a little flying /testing this afternoon. The weather was cooperating, a balmy 107 with winds of 10mph gusting to 14. Perfect flying weather to test escs and motors. This is a stock S800 no gimbal flying 2x6S 5000mAh lipos. GPS set 12 degrees clockwise for magnetic...
  13. T

    RTH problems

    You may have had a conflict with your RC commands and the information that was being transmitted via Data Link. I would test the RC without the Data Link connected and see if that works.
  14. T

    Great Forum..Now for the questions - Herefordshire

    Marshyman, welcome to the club. Flight controllers are a personal preference as well as the frame, motors and escs you will be using. I have an MK that several years ago I was in love with. At the time it really was the only real game in town and you put up with the lack of service and...
  15. T

    kloners TBS Discovery

    Kloner, finally got confirmation of shipping from Trappy of my Discovery and Core, pre-solder, thank you. I should be able to join you in a few weeks with my set up.
  16. T

    Wookong M View and Click to Go.

    I uninstalled everything including the driver for the usb. It took me 4 times of doing this to get it to work. My other issue was that DJI replaced my old WKM MU and I needed to get a new S/N to run the Ground Station to WKM connection. I have that now so I can complete the set up this weekend.
  17. T

    Silly 1st question..

    There was some discussion a while ago about the ports that DJI used for their server that did not work well with some computers/software. Try turning off the firewall and all other antivirus software when you try to connect. I sometimes get that with Ground Station when it is trying to connect...
  18. T

    naza gps mounting

    Kloner, my Eagle Tree GPS and Naza GPS are separated by 19.5cm on opposite arms. I have never lost Naza GPS with that separation. I am using a 5.8gHz vTx at 500ma with the antenna pointing down. I don't know how that fits into the mix.
  19. T

    DJI S800 Product Bulletin - ESC too high temperature

    Try this. One large and small wire out of each side of the arm. I don't like the fact that they cross. Not a great design in my opinion.
  20. T

    Naza failsafe

    A AR6100 does not support Preset Failsafe. It takes a AR7XXX with the data port to support that.
Top