Search results

I have an MK for sale. I have assembled it with loving care and flown it the same way. You can see my build log here: http://www.mikrokopter.us/media/?sa=album;in=28. I wish the thread still existed but is seems to have vanished. I have over $3500 invested in this craft. It includes the...

Since the OP was almost a year ago, I hope that Boris got his setup finalized. I am getting more than 35m on my Immersion 5.8 gHz 600mw. I use a diversity array with the BlueBeam cloverleaf and a patch antenna mounted on a EagleEye antenna tracker. The majority of the time the BlueBeam has...

That is great news. I have a friend that preordered one with a AV200. I am looking forward to the production results, however, the beta units seem very promising.

That is good to know but it is only for public agencies. I fly a 5kg hexa and this ruling does not apply to me. I have heard that for private use the limit may be as low as 5lbs. Even a small quad with gimbal and video downlink can come close to that. If they give us half the public agency...

Make sure your balance is spot on. Move components to make is so. Have you checked your COG in ready to fly configuration or just eyeballed it? If not find the real COG. Then double check your mounting measurements. I think if you do that, the majority of your TBE will go away.

Ken that is very impressive for raw video. The roll is a little twitchy and I am sure you will tune that out in the future. Post will take care of the rest. Nice Job!

I have the 900mHz data link which is 1W along with view and click and go waypoint. I don't know where you are located since 900mHz is not legal in some countries.

You can use 900 mHz, 1.3 or 5.8gHz. I would not recommend using 2.4gHz. Some do and I have done so for my data link on my MK. There has been some concern about the lower frequencies, but I have not had an issue with 900mHz and I have friends that fly with 1.3gHz without problems. The lower...

Pictures always help in trying to diagnose a problem. Otherwise we are shooting in the dark and wasting your time and ours.

The Opto esc's do not have a built in BEC so if you are installing it with another FC with out a dedicated BEC you will not have power. The DJI PMU will not work with other controllers in my opinion.

I have run a GoPro through an Immersion 5.8gHz 600mw Tx to an EagleTree OSD Pro/eLogger with GPS to an EagleEye antenna tracker with a patch antenna and a BlueBeam clover leaf antenna. I have Vuzix 920's mounted in some Ski Goggles. What you are asking for does not exist. You need to put it...

I missed it and your are right it is da** good. I saw a F330 with a CC board fly today that did very well. I fly the v5.06 on my S800 and it works very well. Since I do not have another WKM to put on a sport flyer I can't even attempt what he was doing. I do want to test the temps on my S800...

I am packing up for a morning of flying right now. Taking the S800 with a GoPro hard mounted to the bottom plate, my F450 with my FPV/OSD set up including EagleEyes and my newly rebuilt F550 with a Naza. I have enough lipos for 30+min of flight with each. By the time I get back, I will be...

tstrike is correct. You need to rotate your Naza with the motor leads to the front between motor one on the right and two on the left. Let us know if that works for you.

Ken, if you decide to sell your WKM gear, let me know. I will be interested.

There was some discussion about porting View/Click and Go/Waypoints to the Mac OS. That was several months ago and I have not seen anything else about it since. it would be nice to see that happen. It is a pain to have to tote a netbook around just for my MR's.

I flew the 5.06 this weekend on my S800 and I was impressed with its performance in 8-16mph winds. From what I understand, the new version takes higher gain settings. Sidney posted what he is recommending and that is what I used to start. I still have some tweaking to do but not bad on such a...