Search results

My Best Buy got 3 of the Black. They, and me, are waiting for more. They indicated no issues.

Boris, can you post a picture of the can bus hub. I am interested in what it looks like. Thanks.

5.14 has a dedicated RTH that can be assigned to a two position switch.

Are you sure you are using a WKM, not a Naza with GPS? With the WKM, the RTH is set up in Assistant with a two position switch verses with the Naza with GPS which requires that you either use preset failsafe in your receiver and turn off your tx or set up a mix with another channel to move your...

So, you cannot use the cameras output to frame what you are filming? That is was many of us do.

The new CC3D uses only signal unless you want to power the board from the esc, then one needs to have the + and - connected. I am going to use the DJI Opto escs so I will use an external BEC.

Boris, it is only an issue if you are using non-DJI equipment. With the S800, Z15, iOSD, and Video Downlink, it works as advertised. However, it does negate the use of a second camera.

I sent an email to DJI concerning the camera issue. I got a confirmation back that it was a known issue but no time frame as to when the new iOSD will be available.

I disagree. Can I take you back to the ArduCopter and the MultiWii to name a few that were all for Beta Testers.

I am with RT. Too much time debugging and too little time flying. That is why I went from MK et al to DJI. I did take the plunge yesterday. I have a friend that has the original CC board and really likes them. I will play with it on my F330.

My immersions will take up to 6S so no problem there. I have the full monty of DJI set ups. S800, Z15, iOSD, and VTX with a Nex5N. The full system is well integrated and truly plug and play. My only problem was that the cable from the GUI to the iOSD was fubar'd. I had to move the outputs...

The AR7000 does not support "preset failsafe". Get an AR7010 and it will. The Horizon website has the specs and manuals on all the Spektrum/JR receivers.

Highly over rated.

I don't have a problem with the NanoTech puffing, but the regular Turnegy puff up a storm. I really enjoy the NanoTech. I have 3S to 6S.

I am not a big fan of the RC based channel switching as well. I think that it is going to cause people alot of issues since you are using the same switch to change video channels. It is easy to change channels when you did not mean to do so. You should be able to lock the channel.

Mine just arrived and after a quick set up I hooked up my video goggles for a quick test. I got the OSD display but no video from my Nex5N. I checked all the connections and after several frustrating hours discovered the connector from the Z15 to the iOSD had the leads reversed. The ground was...

Better than 115. I have homes in the high desert and in the high sierras. I am looking forward to the snow in the Sierras.

You have to have the transmitter both turned on and to start the motors. After that, my understanding is you can fly the WKM with Data Link on your computer. I have looked into getting a usb controller but the quality is so poor that I do not want to control my S800 with them. It has been a...

Or 2 JR9503's and four arms, or two operators.

What you want is not the S800 but the Z15 gimbal. The S800 is only the carrier of the real product which is the Gimbal. I could fly a lot of platforms with the WKM but the S800 is a perfect mount for the Z15. I was fortunate to get one and it is now set up. I can't wait to fly it this...