Search results

The VU supplies 4.8-5.5v.

Front Right is M1 and rotates Counter Clock wise. M2 is front left and clock wise an so on around the hexa.

Wow, I don't know what to add. I have and currently own an MK and your are right on. My friend that had a Hoverfly and it frustrated the heck out of him. Dealing with the Factory was an issue. I fly DJI and I have no issues; WKM, WKH, Naza M, or Naza H.

You have to calibrate your Tx then write. After that you need to power cycle your Naza, that includes powering off the copter and disconnecting the USB. If you don't do that, you will continue to get the same message.

What Rx are you using? Some have reported issues with the AR8000's series. Try another Rx and see if that works.

I would also be suspicious of the GPS mount. It does not look very stable. Why not move it the the left and get more that one screw to mount it?

Kloner, your are right, different esc's, different settings. I have some 18A SimonK flashed esc's, I have never used them. The DJI's have been fine for me. I have been fortunate in that I have never had faulty soldered plugs or any other problems with them. I must be fortunate. I have a...

Trappy uses 166/135/131/179 and 189/176. I am more fond of 145/145/130/140 and 90/90. Find what works for you.

You don't say which controller you are using. I am assuming that you are using a WKM since the Naza does not support an Octo set up. Do you have it set up for Octo I or Octo Y? Can you tell us more about your settings, your RC equipment, show us some pictures? Normally it is something...

Calibrate your Tx. Press write. If you have enabled voltage monitor, it appears that you have, make sure the lipo that you are using matches the lipo in the system. If you enabled 4S then are using a 3S to power the system you will get an error message.

Sold!

I use Dean's solder couplers. They work well but the new ones are not great for larger lipos. I prefer the older design that was a half barrel. You could lay the 10AWG wire in the side and it solderer up nicely.

It's Berkley! How could you expect anything else from them. In the 60's and 70's we used to call it Bizarkley. I went to UC Santa Barbara where we burned down the Bank of America. Those were the days. J

Who has a link to a bluetooth usb module that will work with the DJI controllers?

Reminds me of the ship in the Avengers.

I have a TBS Discovery that is equipped as follows: TBS Discovery Frame 4 - DJI Arms with 30A escs and 902Kv motors Custom 4" LG with replacement sorry it has my address on it. Loose the Discovery and it comes back to me. 4 - Graupner 9" props. More props available if interested TBS Core with...

I have one with the optional pinwheel antennas. It works well. Robert has them, http://www.uavproducts.com/category.php?id_category=30 and I am sure most of the DJI dealers, both first tier and second tier. Chris at Atlanta Hobby...

Matt, I think that you have to write DJI for that to happen.

Thanks Tom. I just did some filming at 1080p 60fps and narrow view it was not spectacular video but I was impress with the quality. My Mac Book however was not. It took forever to process the video, 5 min worth, and then to upload 56 sec of that. I guess that I need a faster processor and...

Just got my GoPro 3 Black. I sold my two iPhones to make the down payment. Maybe my wife will make up the difference for my birthday. Not likely. It is charging now along with the remote. I am planning to do some filming with my DJI Phantom. The mount connects to the GoPro without...