New Equipment is Here (Cinestar 8 + HFP + 3xproV2)

P

PaNt

Member
PaNt said:
Guys a question..>!

I have 2x4s 8000mah on the CS 8.... i have the tiger motors 710..

I have baught and 2 x5s 8000 as i have seen a lot to like this motor with 5s and 14x4.7 what do you think??

CHeck the screenshots with the 5 and 4s setups//!
Click to expand...

Someone that can help??
 

P

PaNt

Member
PaNt said:
Guys a question..>!

I have 2x4s 8000mah on the CS 8.... i have the tiger motors 710..

I have baught and 2 x5s 8000 as i have seen a lot to like this motor with 5s and 14x4.7 what do you think??

CHeck the screenshots with the 5 and 4s setups//!
Click to expand...

Someone that can help??
 

P

PaNt

Member
OK i put the 4s 8000 ...! 2 in parrallel of course...

I am 100% ready for MaideN!!! Hmmm sure??? i wish i am fully ready..!

Balance props
Balance motors with iphone and tape
balance the copter with the lipos
Put orange tape to know the front and rear
Loctited all screws
Siliconed all servo connectors to be secured
Temp and Accelerometer Calibration on HFP
Throttle calibration on HFP and the Escs again! (also i have setup the escs)
Reverse the motors
Put ccw and cw props

DO i Forget something??!

IMG_0955.jpg

IMG_0953.jpg
 


P

PaNt

Member
I dont have gimbal ON...
The gimbal is 2500kg..!
I wont put both lipos for the maiden ...!! i will put one lipo.>!
 



P

PaNt

Member
Twister773 said:
lol, I just realized he said 2500!
Click to expand...


GUys relax.. Not the gimbal only.! the gimbal is 700grm..!
Fewer than 2500 is GIbmal with skids with camera 550D and 11-16mm lens Tokina and VTX and Lipo and everything else to fly..! The whole weight is something lower than 6.5kg..! Its more than enough for the setup i have :)
 

T

Twister773

Member
PaNt said:
GUys relax.. Not the gimbal only.! the gimbal is 700grm..!
Fewer than 2500 is GIbmal with skids with camera 550D and 11-16mm lens Tokina and VTX and Lipo and everything else to fly..! The whole weight is something lower than 6.5kg..! Its more than enough for the setup i have :)
Click to expand...

You said gimbal was 2500KG! Lol :)
 

P

PaNt

Member
Twister773 said:
You said gimbal was 2500KG! Lol :)
Click to expand...

Yeap For me the copter is two parts.. Gimbal and COpter..! :) :) the copter is 3900 with two lipos or 4680 with one and the gimbal with its own lipo and everything is 2500 :) :)
 
Last edited by a moderator:




P

PaNt

Member
Ok here is my 5th flight..! I have to check my gains on piclock and on HFP..!

I am not as i want but i am near..!

Comments are welcome..
Off course no post and a lot of compression in order to upload it fast..!

 
Last edited by a moderator:

You must log in or register to reply here.
Top