Search results

This has worked for others: http://www.rcgroups.com/forums/showpost.php?p=20264370&postcount=46

You are correct. When I order props, I always order an extra pair, CW and CCW. Nothing worse than breaking a prop and having to wait for a week to get them replaced. P.S. I think you made the right decision with the F450. The F550 will be good and also available as an ARF, but two more of...

This will help you. http://www.multirotorforums.com/showthread.php?1218-Xaircraft-x650v4-Wookong-M-Configuration The XAircraft esc's are not compatible with DJI.

I have flown my F450 with WKM, DataLink 900mHz 1W, GoPro and FPV gear. I used an Immersion 5.8gHz 600mW transmitter with IBCrazy clover leaf antenna. I had no issue with weight with the stock props.

You have no bind between your receiver and transmitter. Rebind it and try again. If you get the continual flashing orange lights, try another receiver, if you have one. Until you can calibrate the transmitter and set the endpoints for Manual and ATTI you will not be able to fly successfully...

Rebind your transmitter to your receiver. That should allow you to calibrate.

That means you have no transmitter signal, i.e., you are in failsafe. Go to the Transmitter Calibration screen in Assistant, look at the slider. It may point to Manual or to ATTI, but unless they are highlighted in Blue, you are in Failsafe. Look at the lower right corner and it will in text...

Hey Paul, I have not had a 10" DJI prop fail. I have run one into a chain link fence and it just bent. I straightened it out and I am still using it. I also use Graupner 10" props. They sound a lot different. Quieter and what sound they do emmet are at a higher pitch. My experience is with...

I would not down grade the software. I see no reason to do so. I use a AR8000 and a JR9503 so we are close in terms of equipment. I have had issues with the ERR-CFG8 in the past. However, after I have calibrated my transmitter and pressed "write" in assistant, I disconnect the lead to the...

The DJI site will allow you to go back to the last version. I know that others have been able to find links back to earlier versions.

With the 4S you need to use the 8" props. I tried a 4S 4000mah and I think it is too heavy, 3000mah might be better. With 3S and 10" props, I get about 8-8:30 in flight times on a 2650mah battery. I would say that is pretty close to ideal for what I am looking for.

You will need two accounts with the WKM and the NAZA. I used the same login and password for both. Hopefully that will work for you, if not you may need to open two accounts.

Here are pictures of my F450 with Data Link. I think that it is pretty clean and pretty. Just my opinion.

If the WKM connects and the Naza does not, then I would contact your dealer re the Naza. That is not the norm and it may be a defective unit. Did I give you a year back?

+1 you have got it right.

Go for it.

Jamienz: I have a MK Heza, not the XL, that I may be willing to sell. I has Navi, GPS, Diversity with 3 spectrum satellites. The camera mount is an MD-1 with the high landing gear and two battery mounts. I have a Ziggy dome, lexan cover and will include the Xbee transmitter and receiver for...

Iris, you have been around for a while, longer on this forum than I have. You telling me that software, firmware, hardware issues are stressing you out and costing you years of your life? Please, this is supposed to be fun and if you cannot deal with the issues that are inherent in our sport...

One out of two ain't bad. Not perfect but at least you have one operating. What is funny when I installed my WKM driver and then connected the Naza, it connected without having to reinstall the driver. Maybe you do have a defective Naza. Have you tried to connect to the Naza after you...

MombasaFlash, in two years of flying an MK I have never had to access the SD card, but I have not crashed. There are references on the MK.de site as well as mikrokopter.usa site.