Search results

In order to arm the Naza you do have to keep the D/R at 100%. I put about 30% expo in on my 9503. You can add more or set up your Ail D/R and Elev D/R switches to adjust. I do this with my WKM for shooting video.

Sure. I use it on my Trex 550.

Crinson: It is to the COG. X and Y axis are fairly easy to find and place the IMU and GPS. The Z is what hangs people up. Hang your quad by a string from the bottom of a motor in its ready to fly configuration. Follow the line of the string to the intersection of the X and Y axis'. Measure...

I know that someone else did drill the bottom plate. He says he has had no problems. I would be very careful. I checked mine and I cannot see any traces so it would be difficult to avoid them.

From Sidney on RCG: Pricing in China is slightly different than for North America and Europe. For North America- MSRP Zenmuse 3-axis gimbal $3,470 S800 Spreading Wings $1,610 There will be substantial savings for existing WKM and Ace One owners during pre-order period from March 10 to April...

We are still in the rumor mill stage until Robert gives us the real deal, but here is the prices as posted on RCG. http://www.rcgroups.com/forums/showthread.php?t=1606280 There are some serious discounts. I hope Robert and the rest of the USA/EU dealers will be able to offer the same deal.

Have you tried to connect the motors directly to your receiver? Also for your motor connection to the MU, you have the signal wire up and the negative down. It was difficult for me to see in the video. I apologize that I did not go back to the start of your thread.

I watched the video. When you are connected to Assistant in the Tx Calibration tab, if you move the rudder right does the slider move right? If you move the Elevator up does the slider move right? If you move the Aileron right does it move right? If you answer no to any of these questions...

The 10's are great in my opinion for a $4/pr prop. I have yet to break one. The 8's on the other hand, I have broken 3. They seem a little more brittle than the 10's. I have be flying lately with 10" Graupners on my F450. I have some 8" Graupners on order for my F550. I need to find a...

Good info: http://www.multirotorforums.com/showthread.php?2640-FPV-setup-Do-these-components-make-sense&p=27817#post27817

I would assemble your F550 and fly it for awhile before you make a decision on going with another frame. I have a F450 and F550 and both fly very well. I use 10" props on the F450 with 3S and 8" props with 4S on the F550. Don't always assume that a few grams of less weight will give you...

Robert will take care of you. He is a great guy.

I would check the solder joint between the motor and the bullet connector. I would also check with your vendor for a replacement motor.

I flew with a guy recently that noted in his OSD while flying FPV that after his battery passed 10.4v the voltage dropped very quickly. Remember when you are flying, your battery is under load. After it cools down and you measure voltage it will be higher. When mine does and autonomous...

Robert you may be right. After all it is a "test" flight not a demo. I wish we had some video from that flight vs the stuff from the gasser. It should be sweet.

DJI Zenmuse S800 Spreading Wings test flght http://www.youtube.com/watch?v=Qmk5dWVDRzk&feature=uploademail I have not had the time to analyze the led on this flight. It looks odd to me.

I seem to remember someone else asking the same question. If you want them to have their own log in, I think the answer was an email to DJI to transfer the ownership. Why did you sell? You were getting good results with your FC.

I would never have thought of flying while driving a Segway. Brilliant solution.

Here is how I have my Naza set up on a 9503 which is similar. You can mix the Aux 2 with the Fmode switch if that is how you have it set up. Hope this points you in the right direction

There are several people that are very happy with the Orange Rx. I bought one and tried to set it up on my WKM and my Naza. I was not successful with either controller. While expensive, I am a fan of the AR8000. I have it on my WKM and my Trex 550 with DJI WKH. I am trying an R921 on my DJI...