Search results

You may want to add 30% expo to your transmitter on the Aileron and Elevator channels. I think that at one point I was at 50% Expo and 80% D/R to try and calm things down. This will make it less sensitive to control input around the center of the stick. Over control is typically a newbe...

I am not sure where you got the aluminum case for the S800. I just checked the site and the case offer is only for the Z15. Here is what it says: "Due to Z15 few key parts delay, the shipping date of Z15 will be postponed to 2-3 weeks. Sorry for any inconvenience may be caused. Every Z15...

I have taken them out. I use Eagle Tree OSD Pro on the Quad side with GPS so I have data regarding altitude, speed and distance from home. I am also using a GoPro for my camera. Where I was flying I had plenty of references for height, fences etc. I have a lot of practicing to do but I am...

I pulled the trigger last night along with a new Naza controller. For those that are anal retentive, it was two separate orders. Just clarifying.

I used a circle of double stick tape to hold down the foam. It has worked for a year and a half.

Thanks Bart and Ken! I will go and reinstall the software including the Mag3 then recalibrate everything. Ken I will make the adjustments you suggested and see if that helps.

Very nice! I did my first real FPV flight on Sunday. I also use Eagle Tree Systems OSD Pro and Eagle Eye. I did not use the Eagle Eye this time as I was not planning to fly far. I did the ski goggle mod to my Vuzix 920's and I am really enjoying the outcome. Very clear, dark and...

The quick answer is no. You can control you WKM with Data Link, View and Click and Go. You don't need a Tx to do this. I don't like using the arrow keys so I would use a video controller instead. It is easy to set up.

Very nice video. When I was young, I remember diving on a similar channel in Ocean Beach. Were you close to OB with this?

I don't know what Tx/Rx system that you are using. If it is a Spekturm/JR then this will help. http://helifreak.com/showthread.php?t=402934

You will not be able to set the throttle by moving it when you want to bind. You will get an error message. You have to adjust you end point for the throttle to 0 or there a bouts. 0 will give you 50% throttle on loss of signal from the Tx. You also want to switch your mix switch for...

Good call Bart!

I will try again. Bart are you using default settings? If not what are you using?

Bart, I did redo the ACC calibration on the MK. Fortunately, I did not have to reinstall because it was my error on the gimbal for not calibrating the gyros. You know I just don't know what is next. I was hoping for a better flying MK. I may get there, if not it is on the market for someone...

I tried them this morning and they were great! I just taped over the top vents to seal out the balance of the light. Very comfy vs anything else I have tried.

Rob, I am happy you could help Milobianco. Sometimes when looking at a post it is hard to discern what is necessary and it gets overlooked. You took the initiative and contacted him when we did not respond. You did great and shame on us for not catching it.

Are you flying Naza or WKM?

Very cool! Glad you are enjoying it. I went out a flew my F450 and F550 with my MK today. DJI is still the winner in my opinion. But I am going to try and tweak the MK for GPS and PH to see if I can improve the performance.

I just went out an flew my MK Hexa and my WMK F550 Hexa. Winds were light and the temps were in the mid 70's. Perfect flying weather. I don't know what I am doing wrong but on the default settings the MK was clearly inferior to the WKM. I am going out again after I charge some lipos with a...

They are not now! I am shocked. :-0