Search results

I got an email with a tracking number. It is now in Las Vegas and I will have it tomorrow unless something happens. I will be posting my build with Geoff. I am so excited to get this at the discounted price. It is like a gift. Unfortunately I will have to store it somewhere other than my...

Good call. I have a mQx and it is one tough bird. Just make sure that you take it with you.

It's not that bad. I have done worse and I am sure you will as well. Stuff happens. With the cost of DJI equipment coming down, you will be up and flying in no time.

Follow the advertising links above.

I don't think so. I just would like to get the HDMI to analog link. They have been using a standard 5.8gHz down link from what I have seen. The HDMI is small based on the videos. The size of the vTx.

I use 50%. I think the manual says 10% or greater.

Noticed this on the S800 website: Due to materials cost increase we are forced to increase S800 MAP from current US$ 1,600 to US$1,900 effective May 15, 2012. Starting to make the price I paid look pretty good.

Nice, Thanks Boris. Very informative. Now, when will the updated software be available?

http://www.youtube.com/watch?v=kr3OSg4idAA

I am just going with the 5000mAh 6S that I use in my 550 heli. I have enough for quite a few flights without the expense. Once I get everything dialed in I may reconsider. @Goeff, I noticed in your video you mounted the lipo on the top. Is there anything to mount the lipos on the bottom?

I have mine mounted off the rear tab with 4" LG to get the Blue Beam antenna out of the dirt. I have switched to a Mondo Stinger 5.8gHz 500mw with a sony camera mounted under the front tab and Eagle Tree eLogger with OSD Pro mounted on either side of the lipos on the top plate and GPS mounted...

Start Motor: Pushing throttle stick before takeoffwill not start motors. You have to execute any one of following four CombinationStickCommands(CSC)to start motors: Page 12&13 of the manual.

The 6XXX series of receivers does not allow for preset failsafe in the receiver. Some of the 7XXX's do. The 8XXX and 9XX definitely do. If you are using a receiver that allows preset failsafe the above procedure is correct.

M1 at 12 o'clock is counter clock wise(CCW), M2 at 10 o'clock is clock wise(CW), M3 at 8 o'clock is CCW, M4 at 6 o'clock is CW, M5 at 4 o'clock is CCW and M6 at 2 o'clock is CW. The GPS and IMU need to be pointed forward and parallel to the line between M1 and M4. Did you calibrate your Tx in...

Thanks for posting those. From what I can see, you need to set you mounting correctly. I understand 0,0,0 for the IMU. Your GPS is mounted on a mast and was to the front of the craft. That means that at least two of the axis' are off. You need to complete the calibration of your...

Benjamin you don't need anything over the Altitude Sensor. It is fine the way it was designed.

Send us a screen shot of the Assistant screen. I know what the error codes are, I need to see what Assistant is saying on the Tx calibration screen. Sorry for the confusion.

Supposed to be the plug and play arm, motor and esc. Not sure about the prop.

I saw on another forum that the spare arms are $240+/-. Now if you are shooting a $8k job, a few hundred dollars is cheap insurance. I also saw that the props are $70/pair. I cannot afford to crash this thing.

Wow, there are so many things wrong there, where do you start. GPS does not look in alignment, IMU not centered and not aligned with the front. Not sure how he mounted the IMU with the exception of the zip tie. I can almost guarantee that the hexa is not balanced. Paktazh, we can help, but...