Search results

I downloaded the v2.10 Assistant and then went to the upgrade tab. It was pretty much automatic. Here is the support page: http://www.dji-innovations.com/download/naza-m-v2-downloads/

Your Naza is not out of date. The firmware applies to V1 and V2. I have up graded my F330 V1 and it flys fine. Some are trying on the Phantom, though not recommended by DJI or me. Here is some video from today.

The V1 is compatible. You will not have the additional Can Bus support for the Zen for GoPro, BT LED or iOSD however.

www.IrisAerial.com

The Naza M V2 hardware is not available yet. The software is on their website but you cannot up grade your Naza or Phantom yet. It is still in testing from what I have heard. I tried to update my Naza and got a now upgrades are available. I guess we have to wait.....

I have mine set up with a GoPro3 Black and an Immersion 600mw vTx. It works fine. The video through the monitor is good as well. This is a package that you can customize to your needs.

This is a little smaller than 450 but with the case and the monitor it is an awesome package for not a lot of cash. Very transportable. http://www.multirotorforums.com/showthread.php?9374-Product-Review-Fold-N-Fly-Quad

It appears that DJI was a little premature in having a link to the software to download. I tried on my Naza M and while I could connect and go to the upgrade tab, it showed no upgrades available. From what I understand and this may be proved wrong later, no one can upgrade right now. We will...

That is great. When I checked this morning it was not available.

DJI just announced the V2 of the Naza M. There are quite a few new features including switch controlled RTH, automatic compass compensation and advanced IMU calibration. http://www.dji-innovations.com/feature/naza-m-v2-features/ Here are the videos: It has been reported that a Hong...

I have a S800. I am mounting the IMU on the supplied deck for the landing gear for a test. I have never had the loss of altitude or the white flashes while loaded with a Zen, Nex5N, iOSD and a 900 mhz Data Link. I do not have retracts. Currently I am having connection issues with the Zen...

Boris, if you do not have the vibration isolation mounts yet, can you mount the IMU in the usual spot for comparison.

I am with v 5.22 with the BT-LED on a S800. It works fine for me. Several have posted the same. There are so many different set ups I am no longer going to recommend any upgrade to anyone. Fly what works for you.

Fritz, it works for some not others. It depends on your set up. I have not had any problems other than those that I caused.

Looks like a worthwhile improvement to the existing arms. I like that you are now using the silicon wire. Less prone to the chaffing than the solid copper with the coating on it. I have the intermediate arms with the larger CF tab in the arm. I wonder how much stiffer the EVO arms are over...

I think the new esc's will be part of the S800 EVO and allow for bidirectional communication. The A2M is a piece to behold, built in Futaba radio with Spektrum satellite support. All components aluminum. Very pretty indeed and probably very costly as well. My guess, somewhere between the WKM...

Yours is fly pretty much like mine does in the winds. Sometimes it is fun just to take them out and let the wind take them for a ride the bring them back again. I tried flying between two buildings at our condo and it was like a funnel. I was a blast getting the quad tipped over at a 45...

There was also a DJI video from NAB that showed Colin flying a Phantom with a top of the line Futaba. There were rumors that DJI has a Futaba Rx for the Phantom in the works. They already integrated a Futaba Rx in the new V2 WKM and it includes support for Spektrum satellite receivers.

Hey Kloner, I am still flying on the default settings. It has been so windy here lately that nothing has been in the air except dust. You could hardly see 1/4 mile. Not event the heli guys were flying at the field. I have to work some tomorrow so I am hoping to fly in the afternoon or early...

There is a small button inside the vTx that is accessible through a hole in the case. it is close to the led. You push it and get a red led indicating that the channel change was accepted then you get the led showing what channel was selected.