Search results

If you are using iOS7, the sim mode is not currently supported. I can use mine since I did not upgrade my iPad mini or my iPhone. When DJI posts the next version of the GS app that supports sim I may upgrade, but I also use the WM and NM apps on my iPhone and iPad I don't want to mess them up...

Then the decision is his as to how much he wants to spend. I don't think that the difference in performance is that significant either way.

To calibrate the compass, you switch the mode switch from manual/Atti to gps and back 10 times and wait for the solid led. Then rotate the craft horizontally 360 degrees + until the led changes color and then rotate it 360 degrees + with the nose pointed down until the led flashes and then goes...

If he is building a HL Quad then I would agree but anything less that a 650 I think that the WKM or the A2 is overkill. I will say that the price of the WKM has dropped significantly with the introduction of the A2. My concern is the support in the future.

I would say so. I fly two of them on a F450 and F550 and an A2 on my S800.

Dave, good to hear. I am only getting 8 on my JR9503. I think that you will be able to get more than 10 with your Dx18.

I would have him get the Naza 2. The WKM is going away and being replaced by the A2. Support will also eventually go away. He can do just about everything that the WKM could do now with the addition of 16 free waypoints, all you have to do is purchase the 2.4 gHz Date Link with BT for $299...

Already posted but no sim support.

Dave don't crack too many tinnies. You may find more channels than those that are there. ;-) I got 7 on my JR9503. I think that I can get the full 8 if I play in the Tx some more. The Aux 1 channel is the one that is giving me the issue. If anyone comes up with a solution for that, I would...

Right now I am not upgrading my iPad and staying with the old version until I get more comfortable with the app.

Dave, Let us know how this works out with the DSMX receivers.

​Hang in there Dave you are almost there.

The new GS app is now available and is optimized for iOS7. Those that were having issues should now be able to connect.

Droider, I did not set the frame rate on these. I took them off my old MK Hexa. They are Spektrum. I just bought two new ones and they are both DSM2. Ed

The A2 is different. Page 16 of the v1.08 manual out lines the way it is supposed to work. If that is not happening, then you have a set up issue. I would also recommend that you upgrade you firmware.

New firmware is now available. Assistant stays the same. What is new?Receiver Firmware Support DSM2 satellite Receivers used with all SPEKTRUM Transmitters, e.g. DX6I DX7S DX8 DX18 etc., as well as JR Transmitters,e.g. DXS9II DXS11User Manual Add the supported DSM2 Receivers and linking...

Dave, I think that right now I am getting 7, however, I think that I could get one more. Right now I cannot get Aux 1 to work.

I got my A2 connected to my DSM2 Satellites. You have to connect to Assistant via usb, do not connect the lipo. Set to DSM2 in Assistant and then do the bind. Make sure that you watch the channel mapping. Set your channels in your Tx to normal. Then adjust them in Assistant. I am using a JR9503...

That is my understanding. I got the DSMX Rx's to bind briefly then got an error message and the receivers were disconnected. I will try again on Thursday.

Mine works flawlessly with my Futaba but I wanted the option to use my JR9503. Unfortunately I only have a single DSM2 so I tried the DSMX and got no connection. I ordered 2 new DSM2 and will have them by Thursday to see if they will bind. After that I do not know what to do.