Search results

Dave, Until they come back we are here for you if you need us. My A2 is working well. Maybe we can share setups and notes.

The can sell direct as they have been doing for some time. You can buy from Canada or the EU. There are lots of options.

This is how one user did it. Here is what I did using a Futaba 8FG: Inside the A2 Assistant software I mapped the D4 (this translates to the F4 slot on receiver) channel to channel 5. On the 8FG I mapped channel 5 to throttle channel (T3), this way channel 3 and channel 5 are a clone of each...

Also check the Rx type is set to the proper choice. That will also cause the issue.

Dave good to hear that you are getting some assistance.

Make sure that you have the Rx plugged into the right port and the Tx/Rx are bound.

Information to help stabilize the gimbal. No individual channel control.

Thank you I understand better. My previous question still stands, how many mA's are you putting back into your lipos and are you using a balancing charger. You may have a bad cell. 2 minutes is bad 7-8 minutes is acceptable.

Thank you Bart.

Right now you can only use F1-4 and then plug them into the GCU. It does take a servo wire to make it work.

I flew 3 packs through my A2 on a F550 with E300 motors and props. It is a little piggy with the aeroXcraft landing gear. I did not have the H3-2D mounted but did have the iOSD on for flight data. I used a single 4S 4000 lipo, near new hyperions. I was getting about 4:30 flight times. It is...

You can believe me or not. I am telling you that the H3-2D is the same with the exception of the mounting plate. Read the manual. The connections are the same. I have been doing this for a while and have both versions of the H3-2D. One is mounted on the P2 and the other on my F450.

I am confused about your comment of "80% fail safe" What is your first and second level voltages set at and how many mA are you putting back into your lipos when you charge them after a 2 minute flight?

It does but is less intuitive.

There is very little difference between the H3-2D for Phantom and the regular H3-2D. I do believe that it has been posted that you can use the regular mount. If not you can always return it. The difference is in the mounting plate and nothing else.

Yes you have the "latest and greatest" version. Enjoy.

It also has built in patterns that it will fly. I think if you are dealing with the rectangular plot, it would work really well.

It is a nice diagram. Remember not to connect the PC GS program and the iPad via BT at the same time. It will cause you problems. I don't know anyone that is not using the Data Link and RC both on 2.4gHz. The GS is not yet available for the P2 or the Vision.

No RTH means no GPS.

I don't use it but you can port almost any channel on the A2.