Search results

The Naza esc's and motors are not rated to 5S. The V2 PMU is and you should be able to calibrate Assistant voltage under the advanced tab. You don't give us much info on your set up. What version of the software/firmware are you using?

Have you contacted your Dealer about this? If it is a bad Baro sensor, swapping the Naza V2 would be an easy fix. See what they say.

I assume that you are plugging it into the LED port not the EXP port. Photobobga may be right.

Your compass has nothing to do with the altitude readings. It is a combination of the Barometer sensor reading and the GPS. You may have a bad baro. It is more sensitive to altitude changes than the GPS is. That is why I recommended doing the Advanced Calibration.

If you use the Pc version of the data link you have more options. You can trigger the camera from your Tx with the Z15. That I am not sure of. Yes it does. if you use the BT app on your iOS you will not have the majority of the application for you to use as state at the beginning.

See my Red responses. From the questions that you asked, unless you have a WKM, you will be disappointed.

I guess that I am going to start this off. I was in Lake Tahoe last weekend, our second home, and went flying with my adult son. He was flying a Phantom FC40 and I was using my Phantom 2 Vision. It was getting windy when we started flying. At first the ground was frozen but then the baseball...

You can set up a video down link with the set up you describe. That can be ported to a LCD monitor. I use a ReadyMade RC 8" and power the video Rx and the monitor with a 1000mAh 3S lipo. While I do not suggest flying FPV with a stabilized gimbal camera it will allow you to see what the camera...

You need someone that is familiar with your RC tx/rx combo.

I have had some readings that were not completely accurate but when I tested RTH, it landed perfectly. The altitude is more than the GPS it is also the Baro in the Naza. If I am flying at 150m, +/- 10m is not that big of a deal for me. I would do the Advanced Calibration of the IMU and...

Bart you are a better moderator than a Phantom support person. However, you do bring up an interesting point. There have been some vendors that are selling Phantom 1's as either v1.1.1 or v1.2.1. Many of them had Naza V1's in them not the V2. The true v1.1.1 have the orange Naza V2. The...

I have found that sometimes restarting the laptop makes it work. I know that it should not make a difference but it has for me in the past. Just a suggestion.

Are you using the latest version of the firmware? When was the last time you upgraded? When you upgraded, did you set everything to defaults, then do the IMU Advanced Calibration and reset all your gains, calibrate the Tx etc.

I have the ReadyMade 8" monitor and like it. I have the Immersion vTx/vRx as well as the DJI video link. Both work well. Immersion products have always been in short supply.