Search results

The A2 using the internal Rx will automatically enter failsafe upon loss of signal. Unfortunately in the A2 assistant using either the internal Futaba compatible Rx or the Spektrum satellites it will not show any changes other than RC signal lost and that indicates that it has moved to...

Go to here: http://www.multirotorforums.com/showthread.php?16983-DJI-Lightbridge-2-4G-Full-HD-Digital-Video-Downlink/page12 and here: http://www.rcgroups.com/forums/showthread.php?t=2091053&page=44 and here: http://www.rcgroups.com/forums/showthread.php?t=2119713 Ed

I mount mine on a arm facing back. I can see it from many orientations. The ultimate decision is up to you and your flying style.

You have to make sure that your USB device manager shows the DJI device. If that does not happen you have a Device Manager issue. Go here and see if you can work it out:

Sk8bord, I guess you would call me an atypical DJI shill. I am responsible for DJi Forum Support for North America and a DJI employee. What more can I do to help you. I have been active in the MRF for some time now and I am available for assistance. You let me know what you need. SleepyC...

My Hd output,

Sometimes it is hard to see the LED's. Especially since they are under the quad now.

The short answer is no and just get used to it as DJI is currently not inclined to change it.

Have you updated your firmware? If so reset everything to default, do Advanced IMU calibration, download the Phantom settings from DJI and import to your P2V. Then before you fly again, do the compass calibration. That should help you.

You need to calibrate your compass in an open field away from all interference. The switch goes from Manual/ATTI to GPS and back on a three position switch. That is one cycle. Do that 6-8 times and pause, you should get a solid LED then rotate horizontally, the LED will change color, point...

I use all three. Better to be safe than sorry.