Search results

the indicator says Vibration(G) so i'd assume that's g-force...... the motor output should show motor level, there average should be 45-55% hovering for the right prop size for the payload.... Just to understand, a clean plate is a plate suspended by vibe iso,,,, neopreme standoffs in this case.

what does the shakey red line across my heading/terrestrial mean? http://log.xaircraft.cn/report.htm#2014_07_11_025737.205_69.1.03.27 looks like it started the flight before, is that a high gain thing? i might have increased the atti gain right there, not sure...

pretty sure your shooting for less than 1..... Mine runs .2-.3 with a clean plate.....

the stock arms are pretty bad.... they flex like crazy,,,, that's not beneficial for handling or efficiency these have the same dji frame mount as the 450-550, aerial mob arms.... the new v.2 version coming out this month have full registration to make building them out super easy... can trim...

on alexmos full forward tilt is set to whatever you want, usually 90....

i have it setup with both types as single or double stick models and leave the roll on a trim dial.... single stick is all on the right and double is pan left, tilt right. most people that fly like it double stick. it's easy to lean into a tilt just panning with one stick when you didn't mean to

replacing the hdmi converter fixed this issue, nice... thanks for the heads up

i'm pretty sure that's a hero2 recording. mini gimbals are usually so you can look around,,,, side, down, back, etc.

heres some samples of lower cost higher end cams.... security cam 2000 pz0420 pz0513 TBS69

the u7 have a massive bearing, bigger fan and more mass on the barrel but need certain esc's and the combo runs kinda hot. Navigators other than being a high pole count are alot lighter overall. Weird cause there a 12/14 pole but kinda pancake and swing a pretty big prop. They got good power but...

do you know him? he was from your area i think

I had posted something about this a while back and there was zero takers. Theres an attorney that is filing a class action suite against them over it and there losses because of it. double edge sword though i guess

if you need regulators, "buck regulators" work really well, amazon has em stateside.... If you find yourself amongst 2.4 rc control users theres only a couple channels that work reliably..... and even then you gotta keep away from them depending what there using. hitec and spektrums are hot...

that phantom through the fireworks display has been the centerpiece of the news this morning.... unreal

the new motor/esc combos are available.... http://fpvlab.com/forums/showthread.php?31464-TBS-DISCOVERY-%28PRO%29-endurance-long-range

mine has been on 1080p...... ill try auto

i recently went ahead with the newer naza firmwares to get the mac part of it and mine is doing this too...... i'm making bigger prop swaps but none the less, i thought it was naza sorting out the prop difference but now i'm at a loss cause yesterday it did it without a swap...... shoots up, if...

yea tv output,,,, On gh3 it needed power to the board, i've always used the camera power from immersion 5.8 vtx to power it.... makes a simple 3 place servo plug go right on, nice and clean. maybe that's my problem, need to undo the power..... I'll look further into it since you guys have it...

well thanks for the notice, the update went right in so hopefuly that's a good thing, bad part is it didn't change anything with the hdmi out. I've seen several on here with the problem, zenmeuse are having the same issue.

that's hdmi2av that i mentioned also having, no go on mine... never leaves a blue screen.