Search results

he is saying it is working with a cable. i've never tried, we try the hdmi converters, have kopterworx and them HDMI2AV ones and no go.....

my setup wasn't letting me lean on it very hard but i went through the motion so made the clip.... slowly getting a little more creative in my antics.....

what hdmi converter are you on? Vortex, i have the voigtlander 17.5 and that's already too long but man it's money in the dark. i like em both but the rok is $500, voigt is $1100, rok is heavier but the voigt is aluminum bodied. mines crashed twice now, all dented up but works perfect. seen it...

i get ya,,, it's the entire 24hz setting that doesn't have a live feed i believe..... i don't understand how they split up the system speed and the frame rates... confuses the crap out of me. i have a 23.98 4k mode in 59.99 system speed that does work, but at system 24hz no live feed. at least...

the 30 isn't a true cinema uhd,,,, 59.99hz is 3840x2160 vs 4096x2160 in 24p....

theres no output..... it works in 59.99 and 50 hz but in 24hz no modes have a live feed. That's a decent lens, pretty fast and decent focals for flying. If you got the gimbal, try a rokinon cinelens..... i have the 16 and like it, but somebody posted a 12 or 14mm the other day and was alot...

the camera seems to have a few open ends like this that one would hope we get a firmware update at some point to address it all. i'm still hoping the thing will output 1080 at some point in UHD modes....

they both can jump up in a heartbeat, it's the energy a single rotor retains that enables it to autorotate that does such bone crushing damage, decapitations, etc. a 28" blade is 14" long, a 700 blade is 700mm long..... and 5 times the cord, 2-3 times thicker, with weighted tips alot of...

yes, you can get a live feed out of it with a hdmi converter, micro hdmi connector on the gh4 output

I use packing tape.... it's a huge metal tab with solder on it in there that's missing a wire,,,,,hard to miss trim the top along three of the four sides and flip up the flap.....

check the imu and or cable......if you can, take a macro picture of the imu and post it. what brand is it?

go lakeside,,,, 246

wish i could talk guys but my hands are tied...... ball gagged huge difference in big uav and suas were submitting.... everything exists today

soldering the balance leads is pretty easy and straight forward, just make sure to seal it back up tight. when you get a pack in the mail, always check it with a cell checker and return any pack with a low cell..... never charge or change the plug till it's looked at. If a pack sits around in...

crazy man, crazy..... your ordeal makes ol iron jaws look like a walk in the park. I'll never forget it, completely changed my outlook on single rotors to the point i put em all away the difference in the energy of a 28" blade at 3000 rpm versus a 700mm blade at 2000 rpm is night and day...

did you ever fully heal? vision work yet?

if you've ever been to a heli fun fly you'll see people flying at themselves and popping it up last minute, over and over and over. I've spotted standing out there with the pilots on the flight line and it's nerve racking as hell.....

Back in my single rotor days i tried to buy bocas a few times and it seemed like they never fit right. i was ordering recomended motors, but the od was always a little loose and the shaft side was always a little tight. made it almost impossible to improve anything cause i broke more than i got...

I'm immersion 5.8 or lawmate 2.4 on everything........ ultra blue beam on all of it. the one with the little balun on the mast..... when i'm going miles out i'll break out the crosshair for the ground, them things are amazing but are kinda a pain to deal with, you can easily fly out of the...

for us it lets us keep getting clean footage up into 20mph winds.... FFF etc