Search results

flying 40 mph in a santa ana? this frame doesn't have a clean plate, 8 big motors, has a lot going on. it was pushed to 30 degrees in both axis

there not what i know as the spiro net. we use these http://www.getfpv.com/ibcrazy-5-8-ghz-bluebeam-ultra-antenna-set.html Best Ever....

i really like this part, no jello, very little movement on the camera, doesn't physicaly shake around under the rig....

whats the text under them?

team blacksheep discovery pro.....

Does centerpiece not provide a 5v rail for the rx? Got a link for this? searching what you wrote yields nothing on google.....

better late than never. Welcome to mrf.....

what brand esc are they? games as good as over already

theres no sticker or marking under the mushroom? there is rx and tx and if it was having problems, thats most likely the wrong antenna doing it. the very top and the very bottom of circular polarized has null zones, off to the sides is all biz. you want them to be straight up and down, you will...

took this thing out for a real maiden, 40 mph, 30 degrees, let the atti gain get away from me in transport, really hate putting it on a dial, gotta get it to a trim like i was able to in my 8j but 8fgs just does'nt have the trim tab to assign it to.... the fpv cameras not hooked up yet, next...

i'd go superX, wait i did

mine is sbus so i leave it powered in but like he said, the esc servo lead goes to the rx, a 4 way splitter if you got it..... makes it faster

the red and black go to a bec, signal goes to the rx or flight controller pass through/retract channel.

use that hard plastic looking shrink like a lot of batteries and VTX's use, it doesn't insulate heat like the rubbery one. I'm finally almost to the show with one, Sam, coming out of left field with no ear to the centerpiece, can you explain what this power conditioner i'm waiting for is and does?

According to tbs it's not as bad as it looks and it's not affecting a whole lot.... yet. but yea, holiday is here now.... they sure have a lot of them

mouse is pretty abrassive and he doesn't hold back. You'll get used to him, he is amazingly smart about the superX

that one you would want to get servo connector tooling and parts... i use like this http://www.amazon.com/Engineer-PA-09-Micro-Connector-Crimpers/dp/B002AVVO7K and these http://stores.servosandstuff.com/10-male-jr-style-servo-connectors-30-gold-plated-pins/ the best bec is buck converter for...

thanks for confirming mouse.... i had been seeing the double inputs and seen the osd options but never used more than one cam so assuming got me. http://www.getfpv.com/electronics/3-ch-rc-video-switch.html

I might be wrong, know it has two inputs but i'm not sure if you can switch on the fly.... just read the manual to see and it doesn't mention anything

the superX OSD is switchable between two cameras by default....