Search results

Hi, Kimberley has posted a new video of the futur firmware to be released (1.2.2) No more Jitter, pan stabilisation is there and effective :) It's seems pretty good don't you think ?

Hi, as said, Photohigher have passed an agreement with a local electronic company to help them solving power source issue on the skyline. Brendon is working on a new version of the software that will include the firmware inside. He replaced the fine tuning of PID control (request from users).

Contact me by email (all my data are on my website)

Hi rancher, The savox servo 1290 and 1258 can work at 333hz and 250hz, so I suggest you to set it up to 200Hz. (if your servos are those two, but normaly on stock AV200 it's these one) Best regards, Cédric

Thank you guys for these support messages :) This EXACTLY this kind of message that encourage me to have this beahvior with my customers. Before I opened my webshop I was (in fact, I'm still!) a customer and now I try to have the behavior I was expecting other webshop to have. You know the...

Brendon has made a report few days ago where he says the problem is identified. Photohigher also told that they have requested the help of an electronic specialized company to help them solving this issue. In this kind of process some decision must be made but also evaluated and it takes some...

Hi Guys, I remeber you that I have opened a google doc shared doc where everybody can place the nformations about their settings. As this document is open, you can modify it by adding some info on your configuration (dampening, elastic band and so on :) ) I really think this could be helpful...

Yes it 's a futur devellopment for the AV200/130. but the cost will be ... important I think.

It's because it's actually in beta test.

Hi Denny, I have a big respect for your work, your knowledge and moreover your sharing of the info you have but I don't explain why some of your messages are a bit agressive :/ I'm a kind of alien in the world of multirotor webshop because I'm communicating a lot on boards and I publish tests...

Isn't it the same solution ? plcing the skyline on a small flange and glue it with Gyro gel like Khyosho ? This mod has been described very early if I remenber well but effectively it's a good solution. It's interesting to see that this solution (flange + gyro gel) has been found on french and...

DennyR isn't a lemon ! lol ^^

I know that photohigher is improving things actualy. they are working on the firmware and some release are to be expected. You should use the latest one available 1.1.6 with the dedicated software. About the autotune function: it does the same thing as what we were doing previously with...

@ Jes1111: thank you to open a dedicated post about Zenmuse to speak about its feature, that's not the scope of this thread :) @Djiflyer: Skyline is sensitive to vibrations so it's better to place a dampening system between the skyline and the gimbal. a Servo wheel have nearly a good diameter...

Hi, to obtain the best: A/ mount the skyline on a servo plate with gyro gel mount between servo plate and skyline. B/ use the H loom C/ Control that you don't have any mechanical play in your gimbal AND servo. Otherwise, remove this mechanical play. D/ use a small washer of plastics or nylon...

It works with SAVOX servo. check if the deadband and caracteristics ar the same between your servo and the Savox one :/

Normaly the landing gear must be plugged deeper. the vertical part nearly touch the ground. Anyway on the new landing gear there is no more the skids but rods.

Hi DennyR, Be carefull with piezoelectric actuator, the linearity and backlash is huge when you are not working in closed loop. edit: this is for high accuracy and repetability. The velocity of the piezoelectric actuator isn't very fast also for high precision one like nanomotion (Ok you will...

Hi, about the PID discussion: the velocity gain was acting as a DAMPENING function. So it's not a PI but a PD regulation as you describe it. Photohigher have simplified the software interface to avoid user problem using the skyline. About using 2 skylnes: one of my customer have used this...

The pan lock will be available in a future firmware. The 1.1.6 doesn't have this feature. You can use the pan by pluging it directly in your receiver and control it directly. Of course you won't have the pan lock :/ Be carefull to remove the belt for initial setup of the pan, remove the belt...