Search results

Don't look at the manual on PH website. Use the one on MY website, the one on PH website isn't up to date they have a problem with it. Use the Dumy pot like explained on the manual 1.2

I think they have a problem with their website. it is mentionned firmware 1.1.6 and software 1.6 while now the last firmware is 1.2.2 and is embeded in the software. Until Monday, please use the links on my webshop where it's the last software/firmware available. I will phone them on sunday...

I have no update about laster google but have a look at oakley's ski google ;)

Hi, for my summer holidays, I went to Corsica, a small island in the south of france, it's called the "beauty island". I made scubba diving and ... FPV of course ;) When you find a little piece of happiness,it's a waste if you don't share it so I have used a powerbox from immersionRc...

Hi there :) Servo used on AV130 and AV200 are SAVOX 1290 TG (titanium gear) and 1256 MG (metal gear). The MOST important thing for a good stabilization is a very well balanced gimbal. About the 550D: its fit in the AV130 but you will have to buy a corner cable for video output. You can find...

Hi, I know this and to solve it you can do a manual tuning: first: - disengage tilt belt, roll servo wheel, and pan belt. - put all your gain to 0 - click on servo on, your servo will start spinning - go in the tunning pannel (where you have the autotune function) - click with the mouse on the...

The google doc is there :)

Hi Mactadpole, I confirm you that Photohigher have send the new harness and dummy pot to their resellers. I'm actually sending these to my customers. If your reseller don't know about it: ask him to contact photohigher quickly. If you are in emergency and can't wait to have it, it's very easy to...

Hi, some of you remember that in the past i have had some trouble on mikrokopter.us board. I have been banned because I have posted informaions about motor test and propellers or how to enhance an AV200 with video containing links to my webshop. Ziggy have seen that the piratEye is a good...

Be carefull that your bench to be VERY stiff. if your test bench is loosy, you can have a vibration enhancement. When you make some tests: always use a payload (camera, weigh, other) well centered. to check if it's correctly balanced, you can remove belt and servo wheel: if it stays in its...

Do you use SAVOX SERVO also ? you can further than +-5000 in the servo tuning if I'm not wrong

Hi gyroster, I have had this problem also on one skyline, to solve it I have removed the belt and roll servo wheel and made the fine tuning myslef. I first made the autotune and the autotune found 11258 for the roll value. after I made the fin tuning myslef I found something like -2540 or...

Hi Gyroster, why are you using a 1.1.7 firmware rather than the 1.2.2 available ?

It's one of the interest to buy your stuff in a reseller shop: they have easier contact and answer you quickly, and try to solve your problem, and doing after sale and ... When you want to buy a car, you do not contact the manufacturer directly isn't it ? :)

Hi, I have received the replacement harness and dummy pot. People that have baught their skyline in my webshop can contact me with the version number of their skyline (version N° available on the top right corner of the connector). Best regards, Cédric

if you have dl the new firmware you must modify your harness and use the dummy pot (and read the manual also :) )

Hi, Photohigher has confirmed me that the new harness are in production and will be replaced by your dealer free of charge (exchange vs you old harness). The dummy pot will be also distributed the same way. I have no delvery delay for the moment. Best regards, Cédric

Hi, I'm now officialy a Freefly system distributor :) You can find all the CINESTAR stuff in the webshop: frames, gimbals, radians system, ... Soon I will add the spare parts.

Hi, here's my own travel FPV case, I will use it tomorow morning, I'm leaving France for 15 days in Corsica :) Everything fits in this 1560 PELICASE, and it's a safe place :) (against chocks, LiPo accident and thiefs) - F450 - radio - power source - lipo charger - Lipo - Diversity - power box...

Hi , it's been a long time we were waiting for a diversity compatible with chinese Tx, here it is :) this diversity can handle the following frequencies : CH1:5705Mhz CH2: 5685Mhz CH3:5665Mhz CH4: 5645Mhz CH5: 5885Mhz CH6:5905Mhz CH7: 5925Mhz CH8: 5945Mhz There is also an interesting...