Search results

Hi There, i'm proposing an enhancement kit for Cinestar gimbal. This upgrade will allow you an easy mounting for red, Fs100,big DSLR on the Cinestar gimbal. It include a camera rail part to fine tune the gravity center of the camera is an easier way than with the standard camera plate...

you go on my webshop and you order it ;)

Hi, When you are doing the autotune process is your radio transmiter on ? You must have your radio Tx on and all the trim and subtrim set to 0. If you do the autotune with your Tx off, when you switch it on after process, the receiver signal may be different. place the spirit level on...

Hi, Skyline is rate for 7.2V MAXIMUM. I fried mine while I was beta testing it by using a 2S LiPo (7.2v is 2S in my mind...) If you want o run your servo with 7V and up you must power your servo apart from the skyline. just use the signal cable to the skyline and power your servo from a...

There is no baseline gain setting. it depends of the balancing of your gimbal, the position of your camera on it, the stuff you attached on it,.... You will have to make your own experience on it: Place your camera on your gimbal, balance it CAREFULLY (remove the belts and pulley, your gimbal...

You can find it in my website: http://www.1001copters.com/en/spare-parts/68-pieces-detachees.html All the spare prts can be ordered in my webshop. When it's not in stock, I order it with the next Photohigher order ;)

Blu O-Ring and black O-Ring are available on the webshop :) blu are for meidum to heavy camera ( less than 1.5kg) Black are for bigger camera (more than 1.5kg)

Hi, you can have a look at these photos: http://www.mk-fr.info/forum/index.php?topic=4432.msg89128#msg89128 I made them for the french community. If you have any inquiries , I'm at your service :)

Hi there :) A new reference rize for the FPv lovers :) after the diversity, we have now the quadriversity ! This item will allow you to use four antenna to have a very large cover of the sky while flying. For example if you use 4 Helix 3.5 turns, you can cover up to 240° of the sky ! You...

Hi, I have placed a new reference in the webshop: XOAR apparaired precision pair propeller 10x5. I have also lowered the price of the tri blade propellers :) Advantages of the tri blade vs twin blades: - better air flow gives a more stable flight , smoother - lower vibration amplitude...

J'en ai en commande effectivement ;)

Hi there :) since a little time I'm offering some 5.8Ghz kits in my webshop. (200mw and 400mw) these packs are optimized for best reception in 5.8Ghz: there is : - Tx 5.8ghz 200 or 400mw - Diversity 5805 - 2X pinwheel (tested at more than 1km) - 1X helix 3.5turns As you know, I...

Well there is effectively no update on this page since 26/10/12. I will check that with Kim. About your problem I don't undertsand it completly: - you are flying - you disable pan stab with the roll pot cable plugged into your receiver where you have used a 3 position switch (you still have...

Hi Claudio, what are the issues you are talking about ? I didn't see any "list" on the other thread. Once calibrated and once your camera is balanced on your gimbal you have a really good product. The main concern I have seen is the pan velocity: you can't have a stabilization in pan that...

No I suggest to check that the skyline is perfectly horizontal and paralell to the camera tray then redo the calibration setting. A roll movment while doing pan is caracteristic of a misalignement of the skyline: you have a mixing in compensation.

Hi Tuuka, Yes the legs are spining with the gimbal :) no the pan doesn't work well with the skyline stabilization, it works THE HELL very well :) Listen, it's not complicated, I have lots of professionnal that are working in couple: one pilot and one camerman and they all say that the pan...

Yes: http://www.multirotorforums.com/showthread.php?3304-Photohigher-skyline-rsgs&p=76505&viewfull=1#post76505

Full of hope about ? The skyline is a bit trickey to set but once done the stabilization is nothing to compare with what you can have with onmy mikrokopter card or woo kong. day vs night ;)

Read the previous posts please :) I have said that their website have made a kind of turn back: the pages aren't up to date anymore, use the files on my website (manual and software) @Tombrown1: did you contct your reseller to have the dummy pots and the new harness ?

Use the one with the extra wire tilt pot.