Show your FPV video

[1001 Copters]

Hi,

for my summer holidays, I went to Corsica, a small island in the south of france, it's called the "beauty island".
I made scubba diving and ... FPV of course

When you find a little piece of happiness,it's a waste if you don't share it so I have used a powerbox from immersionRc, purchased 2 another pair of fatshark (second ahnd of course ) and we have gone flying with my girlfriend and a friend of us

The machine is an F450+ Ezosd + Tx 100mw + pinwheel + Helix, the radio link was fading before the video link ^^

 

[guy1a]

Did a test to the anti vibes ..

sgs II

 

[guy1a]

here i changed the props .. new ones.

way better

 

[guy1a]

 

[Jackella]

Mates wings and my quad FPV..Naza flown manual mode..

 

[Macsgrafs]

Not my video, but if you're based in the UK check it out:-

 

[DesJardins]

I haven't been able to fly so I decided to attempt a first video edit

 

[tstrike]

Des, were you in the car fpv'n? How far? How fast? ATTi or manual? Your ship looks like it tracks perfectly, nice flyin!

 

[DesJardins]

Des, were you in the car fpv'n? How far? How fast? ATTi or manual? Your ship looks like it tracks perfectly, nice flyin!

Thanks! Yup I sure was, it's the most fun I've had yet doing FPV.
That flight was just over 2.5 miles long, average speed was 42+mph & that particular flight was in Atti mode.

I have some more but am waiting to get a new laptop and software for editing so I can post a full out packaged vid.

 

[DesJardins]

 

[02deuce]

FPV Maiden Flight

Finally was able to finish my Discovery and attempt to do my first FPV. Still need to work out some electronics issues,
other than that it was a blast.

 

[Macsgrafs]

02deuce, nice mate....I see you have afew vibration problems. I use lite ply (3mm) with foam stuck under it, then screw it down using nylon nuts N bolts....seems to work very well & very cheap, thats on my quad with a gopro.

Ross

 

[02deuce]

02deuce, nice mate....I see you have afew vibration problems. I use lite ply (3mm) with foam stuck under it, then screw it down using nylon nuts N bolts....seems to work very well & very cheap, thats on my quad with a gopro.

Ross

Thanks for the input mate. Actually its a bad new tiger motor see:
http://www.multirotorforums.com/showthread.php?7312-TBS-Discovery-with-Naza-Maiden-flight-crash

I just couldn't wait for the new one to arrive to fly it under the hood.

 

[Macsgrafs]

That makes me want to check mine...maybe balance them with tape as my octo suffers with vibration for some reason?

The temptation for you was to much...no worries, I can relate to that

Ross

 

[Danub]

Cruizin' my qav500 at the park
parental advisory. . . explicit lyrics

 

[02deuce]

Danub
Nice flying, whats your setup?

 

[guy1a]

thank you for sharing Danub

i was sitting on the edge of the sit all video ...lol

 

[Danub]

^ Thanks Guys
I am finally getting to where I "think" about it less and just do it. . . . coming from fixed wings MR's were a challenge.

setup:
qav500. . . avroto motors. . . 30amp simonk esc' . . . CC3D. . . apc props.

 

[Kilby]

I've really got to mount a gopro on my fpv rig. I've got something new that I've been wanting to try and make the perfect video. I might have to have a go at it this weekend. Details to come soon. ;-)

 

[krleas]

TBS maiden flight at -3 degress.

TBS discovery
UHF long range, Kopterworx 5,8 Ghz video link with Cloverleaf
KW2 motors + KW30 escapes, Graupner 9x5
Gopro Hero2, MX20 with FPV pult + Liliput LCD 7 inch
Lipo GensAce 4s 3800mAh, Flight time 10 min