Search results

The proper setting is .4nm of torque.

Make sure the prop screws are properly attached. DJI specs .4nm of torque. The least expensive torque driver I could find was $69 on Amazon.

Mike I sent you an email. The flight logs that you sent me were for a "hard" landing not a loss in the ocean.

Go to the play store, it is there.

A2, Lightbridge, iOSD MK II. Thats it.

It is 16 pounds with the lipos and the lipos weight 4 pounds so 12#'s or about 5.5kg.

Some pictures from todays flying.

For what purpose. With the Data Link that is for iOS only, but the others are for Android as far as I know.

You can download and install on your Mac. There are still some that DJI has not ported over yet but they are getting better. From my MacBook Pro. :-)

You need to connect the ribbon cable to the USB connector provided. That charges your camera battery. If you do not connect it you will go through the GP pattern very quickly. Look at this video. I know it is for the Phantom but what you are looking for is the ribbon cable install. The...

They did not but looking at the picture it appears that they line the opening of the CF motor mount. I would hope that they slow the wear that users are seeing on this part.

I checked with DJI on the copper washers between the motor mount and the grommets. Here is the response: For the copper washers, it can works with S1000 too, we already added it into the PART 8 of S1000 premium.

Very cool video of the Ronin in action with a nice Lambo thrown in.

Have you upgraded your Assistant to v3.2?

My guess is that you are over the max amp draw of your lipos. I experienced similar behavior of some inexpensive packs, not cheap but less than top of the line, on my S1000 with a 5D.

Here is a new build video from DJI.

The gains are unchanged and the same as my S1000. I am using the bottom plate as Z=0. The IMU is X -7 and 0,0 for Y & Z.

I was opening the PDF version of the manual assuming that they would both be the same. They are not. I agree that they are to prevent the chaffing of the CF on the grommets. They should work on both the S900 and the S1000. The problem will be when will the dealers get them and will they be...

I just pulled the manual from the website and what I see ends at page 31 and does not show the detail that yours does. Can you provide me with your link?

Good luck on this. Let us know how it goes.