Search results

I ran em on 16", 17" and 18" and the 18"s bar none make her fly best,,,, amp draws with an epic hovering was 78, pushed it to 130 amps, has 400 amp buss.... 20 amp of 20c so 400 amp service all across the board, prc6 times 2 are probably my biggest limiter. Haven't felt much in the way of heat...

I believe ya lanzar, so far i've been "so good" Have had these stupid things causing alot of havoc around here and finally, something is working. been messing with them since november last year and am just now getting comftorable with actualy carrying a valuable payload with them.... the...

because i tried several alternative and it produced commutation errors. in this case it isn't what it's rated at, it's what works went 490 cause the numbers on a hex with 18" props and an epic made it so. it hovers at 45-50% with an epic, 30% with no payload, 40% with gh4 that is the tbs...

I didn't have any luck with the og, march or june versions and maytec esc's. there claimimg blheli works

heres u7's flying awesome.... you just gotta go with what tiger recomends,,,, and it says "We recommended the T80A ESC as the default combination with U7 @ 6S"

we do cinema with epics for work, then i come home and play with gh4 and it just feels flat and lacking. the people we fly epics for have no interest in it. I played with some of these upscaling softwares. guess i'm getting a better color correction with all the same color corrections.... Ones...

Transport Risk http://www.transportrisk.com/approveduavoperators.html

I put 10,000 mah back into 20,000 mah of packs, it's usually 22.5 no load, 21.5 loaded at 100ish amps Yes ice cooler, but them blue frozen things are better so water doesn't get in them,, blue ice, wallmart. I use a softsided cooler just cause it's what i have, camo so is easy to hide on set. I...

good idea.... sometimes it happens out of the box, any time you break a prop, etc.

I'm guessing this is one of these upscaling softwares? http://rarevision.com/5dtorgb/ Trying to dive into camera forums

We have some nitro motor temp gun from amainhobbies.com, they use them to tune nitro cars

yea, i see what your saying. as a hobby you gotta have it covered. that sucks

we carry 5 million liability and $80k in hull coverage

pretty good... haha

if you take all the props off, switch to manual mode, fire it up and rev the throttle, do you feel any vibrations in the arms? vary speeds and look for anything

I used phoenix to learn 3d heli and 3d fixed wing..... i've seen another sim alot of multi rotor guys use but not sure what it was called. phoenix has a couple multi rotors last i looked a couple years ago. It likes windows and nvidia graphics cards. they all do.....cheap ones are like...

i'm pretty sure you want med or low for high pole count.....

the 3520's i'm on are tripple stacked bearings. I'm not sure on the u series or even kde,,, never looked. the u7 have a massive diameter bearing

yea, they sound different. this shows with and without a 3 axis brushless gimbal and gh4 doing 47mp and 38mph.... and the current draws the osd indicates .9 volts lower than actual and is on one of two packs so overall is double the current shown. the current and mah used are exact with...

the 490 are like that too. there 80 amp esc wire is huge like 12 or 14.....