I am having a problem with my Z15-GH3 or iOSD Mark II. My video feed from the HDMI is all jumpy and flickery. See video...
https://vimeo.com/78555553
My setup:
S800 EVO
A2
ZENMUSE Z15-GH3
iOSD Mark II
DJI 5.8 Ghz video downlink
Panasonic GH3 (firmware version 1.2)
Creative Video Mode
AFC
Shutter Priority - 1/200
HDMI resolution - 1080i
From what I can tell it has to do with the HDMI interface because if I shut that part off the image becomes fine, the OSD from my iOSD Mark II is easy to read and stops flickering. As soon as I turn on the HDMI it goes crazy again. I have my GH3 set to Creative Video Mode, focus set to AFC, shutter priority and set to 1/200, and the HDMI output of the camera set to 1080i. I read that the video could be messed up if your settings aren't right but I believe mine are correct unless I missed something. Anyone have the same problem or have success with a similar setup? Any help is GREATLY appreciated!
Thanks!
https://vimeo.com/78555553
My setup:
S800 EVO
A2
ZENMUSE Z15-GH3
iOSD Mark II
DJI 5.8 Ghz video downlink
Panasonic GH3 (firmware version 1.2)
Creative Video Mode
AFC
Shutter Priority - 1/200
HDMI resolution - 1080i
From what I can tell it has to do with the HDMI interface because if I shut that part off the image becomes fine, the OSD from my iOSD Mark II is easy to read and stops flickering. As soon as I turn on the HDMI it goes crazy again. I have my GH3 set to Creative Video Mode, focus set to AFC, shutter priority and set to 1/200, and the HDMI output of the camera set to 1080i. I read that the video could be messed up if your settings aren't right but I believe mine are correct unless I missed something. Anyone have the same problem or have success with a similar setup? Any help is GREATLY appreciated!
Thanks!