Yep this is what I am currently using: Motor is a Pyro 700-52 with 13t pinion plus a kontronics 120 heli set to mode-6 The blades are 710 asymmetric Spinblades 95 mm tail blades and the headspeed in Idle-up 1 is 1450 and -2 is about 1600. sometimes I run a bit faster if it is very windy. Normal mode I don't use as the headspeed can drop too low in the descent. For practice Autorotations use the hold button. 25 mins is the normal duration but you are better off with lighter cheepo batteries and run for 8-10 mins.
hope that helps. The main change from the photos is that the Zenmuse has been removed for my own 3 axis brushless based on Alexmos.
hope that helps. The main change from the photos is that the Zenmuse has been removed for my own 3 axis brushless based on Alexmos.