Search results

http://www.dji-innovations.com/minisite/exefile_download.html also this link http://www.dji-innovations.com/minisite/index_en.html This may help. Michael64

I understand you can remove the software and reinstall if you have assistant and firmware saved, but it would make more sense to be able to have different assistants and firmware loaded on one computer without the hassle of uninstalling and reinstalling is what I meant. Instead of the updates...

1+ on that you should be able to use any of the software and firmware from previous releases. It should be a CUSTOMERS OPTION on what they want to use. Michael64

xavivo I agree with all the above and will one more the WKM does not like light disk loading so with no gimbal or extra weight you may be overproped you may try some 11x4.7 and see what happens. The COG is very important as well but even if that right on the money with light disk load you will...

Thanks Ken you always have true answers I am looking for. I appreciate it. Michael64

Hey Guys Iam still running 1.11 Assistant and 4.0 Firmware. Question is if I decide to update which Assistant and which firmware are stable with no issues other than the ones that needs fixing. Mine is flying fine was just wondering if I should upgrade or just keep what I have installed. Any...

If this is true than why is the 800 coming with low KV motors and large props. Is DJI running different firmware than everybody else is. Michael64

Hey Ken what firmware version are you using currently, and is the firmware without bugs. Michael64

Looks super nice I liked the framing of the video, what program do you use to edit in. Do you fly completely in googles or is it an eyetopper setup. Looking for a way to frame shots as well but do not want to be full FPV. Michael64

Dominic Yours is close to mine, you may try to up the yaw gain to about 280 and lower the vertical to 195-205. As far as pitch and roll you may need to up it a little to say 260-265. Now on the atti gains try them about 65 on both and see how that does. Also how is the IMU mounted, by that I...

Hope that answered your question and get everything working for you. Michael64

As long as you F2 to pitch and F1 roll, and then yes connect X1 to the channel on the receiver that you want to control the pitch with everything should work fine. Michael64

For some reason in some faulty GPS's it seems to send misinformation to the controller. Its just not losing satelllite its sending what it thinks its reading but not real time data if that make sense. I have heard of just a few do this and sometimes hard to sort out to find out its the GPS unit...

Kari I can understand dirty pants for sure, but if you did lose GPS lock it will make the controller go nuts which sounds like what happened. You should try atti mode for sure if you replace ESC's or not. Its the only way you will truly know if that is what happened. Hope you get it sorted out...

If its in GPS mode when it happens like in the video you can hear the motors rev way up like is lost GPS. There has been some people had this happen. Not saying its not a motor or esc but looks like he would have seen the prop slow or cut off monetarily. Michael64

So does this only happen in GPS mode not in Atti mode. Michael64

What flight mode were you in when this occurred by chance. Michael64

A couple of question what are your gain settings set at and what is the All up flying wieght and one last thing what is the distance from center on motor across to center of motor shaft. This info will help in helping give you info to try. Michael64

Do not use velcro because the Naza has dampening in the case, hence why they want it hard mounted. If you velcro it wobble to where you can not get rid of the wobble and any vibs from the props frames etc could make it worse. Michael64

Yes like I posted in first the Naza is in wrong direction the motor inputs of the Naza has to point to the front of the frame straight forward. You have uses sideways which will cause a flip straighten that out and you will be there. Michael64