Search results

Double the direction of the Naza Motor inputs go forward or to the front of the of the hexa. Also double check the the prop are the correct direction and the motors are turning the right direction as well. Default gains are to low for the hexa the basic gain needs to be higher for the hexa...

The video is great but if nobody else can get the mount what the purpose you see footage in the movies like all the time. I am sure we all more interested in stuff that can be purchase by anyone rather just for hobby or commercial use. Michael64

Set it up in Acro mode not heli mode. Michael64

How easy is it adapt to other frames. What high is needed to clear the mount. Michael64

La Turbine very nice video with great quality for sure, which camera mount are you using on the Cinestar Hexa Michael64

Hey Ken thanks again for the info on your setup. Michael64

Ken thanks for info, the Exceed Proton 30 amps ESC do you like them better than the others or they about the same. Michael64

Hey not bad for the Naza controller. What motors and esc's are you using on the AD 6. Michael64

Try basics at 290 Yaw with 280 pitch and roll and 200 on vertical and the atti gains at 65 to 70 and see how you like it that way. Michael64

Make the mounting measurement are real close as well along with the right positive and negative values this will also cause the T-bowl issue as well. Michael64

Solid blue means you have a radio communcation problem. Sounds like failsafe is activating. Did you setting the 3 position switch to get manual atti and GPS to light up blue. When switched to GPS it should be a purple like color. When connecting battery you should get an array of all lights then...

On pricing you will have to contact John and RcHobbyHelicopter.com its his frame design and not sure if pricing has been set yet. Thanks for the kind words on the build. Michael64

Yes the AV130 is controlled by the WKM unit I am the builder for and tuner for of the ADX 6HL posted. The new Karbonic 60Six should be extremely better than the Droidworx. The motor to motor spacing in just slightly larger than the Droidworx frame. The frame has a better layout for all the...

I have a 10 pound Y-6 its fine in up to 8-12 mph of wind holds its own real well. What motors and props or you using. Michael64

How do you find out what the settings or if there is no way to check it. I find this uneasy how do you know what battery setting timing etc. Michael64

Hey Ken what card does the DYI ESC's take to program the Plush / RC Timer card dont work or at least the one I have. Michael64

John at RC Hobby Helicopter did receive some Naza's by themselves. Michael64

It clear in the video somethings not right way to much movement just after takeoff. Basic gains controller the the board in manual as well as atti mode. The best way to trim is in manual mode and turn the gain up and up till it starts occillating then back the gain off 10% or maybe a little...

Fotoair just flew mine in the highest wind so far the winds 13-18 with gust and the GPS hold was totally great. I was impressed to say the least every flight seems really good and solid. Looking at your gains 90 may be to high on the atti side for fun try the basic at 250 all across and 70 on...

I would try bumping the basic gains up. But should ask what is the flying weight of the hexa. Michael64