Search results

Resistors to make Dummy pots are required and there is a wiring change as well for the 1.2.2 firmware. Wiring change is for 1.2.2 FW and new software. The dummy pot will work with the 1.1.7 as stated here along with the servo wire change. They will be releasing the Manual with wiring change...

Why worry about adjust just get the fixed ones they are smaller and easier to make and tape to servo 2.2K to 2.7 1/4Watt they will work. Michae64

You can get 2.2K 1/4 Watt resistors at Radio Shack that was closest to me and I make them with those. I also ordered some 2.5K 1/4 Watt from Mouser Electronics, I live in Texas and they are located in Dallas Ft. Worth area so overnite shipping should have some tomorrow if you dont find them I...

Adidas4274 Great job at filming did you edit this as well and were the ground shots of this video dome with the PJ710 or PJ760 video camera Michael64

apejovic You are right its US model shoot 60 and European models shoot 50 we NTCS and you all have PAL but its the same camera down to the other specs thanks again. Michael64

Apejovic Thanks alot for the info the info considering the Sony PJ710V for myself. Whats the difference between the CX740 and the PJ710V. Michael64

apejovic If you would not mind saying what settings and or mode were you setting on the 740 it handled the night scenes very well. And by the way very nicely shoot video as well. Michael64

Droider I agree with you. Jeff does awesome videos and is in a position to help others but mostly just post videos. The forums or for learning and sharing what works and does not work. Brain storming between alot of people sometimes helps figure problems out as well. Not trying to flame Jeff is...

No problem will help if I can. You can even pm me as well. Michael64

Thanks guys for the responses any and all are welcome will help all of us compare settings with the different setups. Michael64

Not that hard really Iam running FlowMotion 2.02 the detail is really nice when viewing the raw footage. It works really well but takes a high end card to be reliable all the time. There is no change to the menu settings with the hacks it changes the settings in the firmware. I run mine in...

No jello at all it what happens when uploaded to youtube the the file before uploaded look really sharp its amazing how much youtube down grades it. You takes it from 1080 to 720 which destroys the quality a good bit. I have not really had any jello issues with the GH2 the hacks on the other...

This one was shot about 2 weeks ago with my Y-6 and the GH2 Regards Michael64

Here is one I shot with a Y-6 and the GH2 down in Texas. Regards Michael64

Currently flying a 900mm Hexa on 5.02 Firmware. Question does one of the newer releases of firmware work better with the large frame hexa's mainly referring to dealing with the wind better. Using seperate gimbal controller so that does not matter. The machine AUW is 11.5 lbs. on 12 inch Zoar...

Jeff once again you knocked it out of the park with that one. On the Sony 760 are you in manual mode with manual focus, also which shooting mode or you in as well if you dont mind saying. Fantastic job as usual you have a wonderful part of the states to fly in for sure. Michael64

You really only need the signal wire going to the WKM you could have just run the positive and negative to the BEC. Michael64

Bartman Which version firmware are you flying. Mine is still 4.0 I would have check to be sure its assistant 1.11. What is the weight of your machine as well. Just trying to sort things out a little. Michael64

Bartman Thanks that would be great. I have tried 12x3.8 and 11x5 and 11x4.7. You may be right maybe larger props may not like being the same because of less disk loading. Let me know when you get them. Michael64

IrisAerial The weight of the machine is 10.5 lbs and my thinking is I took away disc loading and the WKM does not like light disc loading at all. That could very well be the problem and your right the Y6 flies real good for sure. Michael64