Search results

Droider Do you have the roll connected to the receiver at all or do just have it powered up and just setting it up in the software. Adam told me that the roll really just needs power to it because you really never adjust roll anyway like pitch and pan. Michael64

Drioder You have the right setup for sure and camera. What FC or you using on the Y-6 Michael64

Just my 2 cents you cannot tell what its doing from the view shown you see the mount working but how well you do not know. You have to show the footage from the camera to be able to judge anything about the Radian and gimbal setup. Michael64

If you what reliable focus you need to use manual focus to many time the shot you really need will be off so the only safe way is to use manual focus that way one less thing to worry about. Michael64

Also give John at AddictiveRC.com a call he has them ready to ship. Michael64

With all the skyline problems they wont answer any of my emails anymore. I explained the problem to them and they were real nice a first on answering. But when none of the suggestions helped with the jitter problems they said its just you or your mount has slop in it. So I replied and said this...

Nic looks like you close but there is either dust or dead pixis in your camera hope its just dust or dirt on the lens, mine had dead pixis in same spot as where yours is. Nice video. Michael64

Ferdinandk Which firmware do you reccommend for the S800. Also Pan, Tilt, Mode and Shutter are all of them just switchs and Sliders. Pan and tilt would have to be knobs or sliders correct the others on switchs does it all have to be connected or can you just use tilt mode and shutter. Thanks...

No you can not you will have to get the serial converter cable from Photohigher and also download the drivers for it as well. Michael64

Slew mode is for a two person setup I belirve I had to uncheck the box to get mine to work right default is Slew Michael64

Bingo there is no and there has been nobody fined to date from the FAA Michael64

Which version of the Skyline do you have mine was 1.2 and got the jitter problems. You may know but if not look right above the connector on the skyline it will tell the version. Michael64

My skyline acts the same way small camera no problem move to GH2 oscillation on pitch start really nothing to do to stop them. I thought I might have a bad skyline but now you say you acts the same way most be in the skyline coming from absence of the pot on pitch I guess. Michael64

Yes makes no difference either way connected or disconnected Michael64

Its a new AV130 Michael64

Question is what if you all the above and you still have jittering in the pitch servo and cannot get rid of it no matter what and you manual tune and autotune but the jitter remains its like its hunting where ever the pitch is. I have tried to balance the camera different positions and have...

Read back post its not working fine yet. Still have jitter problems on the pitch to point that makes the video unuseable. Have emailed PH and no response since early going. They were really good at first then the new firmware fixed the jitter problems and you could one battery source will when...

Be waiting on the video because it appears you have the only perfect one sold by PH Michael64

PondMedic I glad someone has got a working one if I understand you right this is Zero jitter in the pitch of the gimbal and horizon is staying level. Also is this with a Photohigher mount or other mount. With the result I have with new firmware there is no real improvement unless I just have a...

Photohigher still has problems with the Skyline or at least mine does the jitter in the pitch servo is unchanged even with new firmware and all modifications. I have been quiet till now but this is going nowhere at all you have $340.00 invested and you have something that dont work and is...