Search results

not true it's very important when flying in gps mode. The naza works like this if you head west by 2 ft it says fly east to get back to the right spot. If west is east or it's off it flys the wrong way then says fly back harder so say it says head east it heads west then it says more east then...

Take the prop out the side with the writing is the up side. Then the part with the bump should be the leading edge the pointy end is the trailing edge meaning the leading edge cuts into the air the trailing is the back end of the prop so it spins that way. That's how I tell them apart quickly.

my f550 did the same thing stupid cheapo motors they couldn't of used a smaller or cheaper clip and of course it broke in flight and same thing. Splat... just mine came down slower allot less weight on it.

Ok I'm going to be doing a build on my next quadcopter I have already picked the frame but nothing else yet. HB8 Canadian Made http://hoverbotfpv.com/frames.html I'm thinking of making it a 6s setup since with 3s gopro, fpv gear, OSD and a 5000 pack he only gets 6-8 minutes of flight (now...

I want to build a quad with a 6s battery for filming ect I really liked the DJI mini osd but I don't think I can use that with a 6s. I think 4s was max

Im running the following DJI F550 (Whirlwind Frame (clone)) Afoman ESC 30A (work great better then DJI factory ones) DJI Motor stock red ones Grabner 9.5 props (10.5 fit with no mod I have both) Landing Gear (can't remeber it was cheap 20 bucks light too) tarot 2D Gimbal (works great) GoproHero...

bradtech sells them they're the Canadian supplier.

I would use a washer to force the prop to be further up that way you can pinch it with the locking nut for a snug fit. Now it can move a little left and right but nothing is 100 percent in life. I just balance my props with a prop balance put it on that balance by sanding the edge that doesn't...

I use the tarot 2d gimbal and a cheapo landing gear with the rods under it and it works great.

make sure the battrey can't move left and right it throws the weight off and causes a problem. Make sure it's strapped in from all sides so it cant move. Also the compass might need to be calibrated as it might be a little off. It can fly in a circle geting wider as it goes that means you have...

you also picked what type of quad or hexa it's

I get 9 with 1 6000....

make sure the esc wire isn't backwards. Do you at least hear a click? sometimes you have to click more the once to get it to spin. Turning the motor a tiny bit can help as well

I added the Sbus but it was already wired up the old way so I said why mess with what works. I added it for the MiniOSD. I don't even use the Bluetooth (my ipod is to old) My chopper is a bunch of random wires all over the place. I just jammed it all in :p I did move things like the video...

My motors on the stock arms are ice cold or room temp when I'm done flying I use a 4s lipo though and I cut down on allot of weight by using lightweight parts.

My rx is a FrSky S8R-II Plus It needed to be set that way to work. Before I was using another rx and it had a green light and would bind out of the box. both were up. Solid Green or solid red (mines red) work fine. You programed the remote right? You have to calibrate it as well. I just used...

The naza on mine is the V1 (same thing) For me it's Yellow (warm up or failsafe mode if it blinks slowly) Then Green Red, red (as it locks onto satilights) Then Green, Green, red (almost all) Then Green, Green, Green (max satalight lock) Once you plug it into the computer it blinks differently...

I had to flip some switchs on the radio to make it work I will take a picture.

Well I think it would be less stable as the motors are further out if they're close together the flex in the arms would be less. How ever you can then use larger props with longer arms and that might make it more stable and add some flight time so it's a trade off depending on what you want to...

I have a DJI F550 just think a stock 30 esc, stock motors. I was wondering if 25c battery is ok to run on it I currently use a 40-60c 6000mah 4s lipo that gives about 5-9 minutes of flight. I ordered one but I'm wondering if it might not have enough power for the chopper. I also run a gimbal...