Search results

I want something better then a gopro hero 3 black for filming on my DJI F550. The quality of the video is ok I want something that can take it up a notch with a gimbal I currently use a tarot 2d gimbal with a gopro hero 3 to film and use as the FPV camera. So what can give me a better sharper...

I have all 3 better safe then sorry. I use the timer as a turn around guide. So do I just go 3.45x4 to get the total voltage at 13.8. I set my lipo alarm at 3.5 per cell since it was 3.7 which is a little early.

People always say don't pull more then 80 percent out of them so my question is if your watching the voltage at which point do you want to be on the ground at which voltage? Is it at hover voltage or under load like your climbing up. I don't want to ruin my lipo as they can be expensive so...

3 bad motors and mine flew into the sea it was part of learning about it. Now I know how to flip the switch and recover it out of the fail safe ect so as long as you don't panic your fine. I did crash 1 time on purpose I went well I'm going down might as well pick were I crash I was testing the...

Try flying with trees and rock with 12 ft of flying space in high wind to film someone climbing the rocks. Now that was hard to keep it in the right spot with the wind blowing it away from the climbers (I flew so the wind would push me away from them) Now that was hard and way more risky. I had...

Here is the longer version of the video edited ect. It's a little long but I think the shots were ok will have to do more to get better shots of climbing. I tweaked my naza settings so I should get a little more time in the air.

try lowering your gain settings by 10 or 20 percent then try a flight and see if it improves or gets worse. I find with 10 inch props and 8 inch the gains can be the same bump up to a 12 inch prop or 13 you have to lower them allot or you have a bad day.

I got within 5ft of rock climbers with a gopro but the wind was blowing me away from them so for saftey I stuck to 1 side and the wind would keep me from drifting into them.

Here is a sneak peak to a video I'm editing of rock climbing footage that I shot http://youtu.be/Y3_zTsgwnmk

The sluggish is the naza warning you it's low to what ever you set it too.

I'm looking for a case for my DJI F550 I can take the landing gear off easy it just snaps onto the poles so it's very easy to take down and put backtoghter I also want to fit an LCD screen in the case as well as some lipos that way I can have everything ine 1 case. I have the gimbal, Radio...

resoder that 1 conection sounds like it's lose and when it flexs it loses contact with the board.

I set my warning at 14.2 that's when it throttles down. I find I fly till I hit 14.2-14.3 if I go lower bad things start to happen I could do more but my lipos are sitting at 3.74 at the lowest at that setting

My father made 2 of them the first one had a problem with the motor and it took off really fast...

So I was wondering with many people flying fpv how far is to far for you. Everyone is differen't and each multiroter can only go so far so what does everyone here limit them self to?

the lines could be the sun through the props. If it changes as you move then it's noise on the power line There is more then 1 type on ntsc and pal to pick on the moniter you have to find the one that works I had like 10 options... Picked the right one and it's fine I also had to set widescreen...

550 is more stable. Carrys more weight. Is better in stronger wind (due to the weight) Is a better camera rig/setup The 450 can get more flight time. It is better in tight spaces.

Here is the link to the board, sensor and usb plug in if you want it's 66 Canadian... Shipping to Canada and the US is free.... http://www.banggood.com/Tarot-2-Axis-Gyroscope-ZYX22-For-TL68A08-T-2D-Brushless-Gimbal-Gopro-p-906577.html

I had mine come new out of the box after it moves to a certain point it would do that I contacted Banggood (were I bought it) they sent out a new board and sensor for free that fixed the problem. It's the board most likely it could also be the sensor. It's 70 bucks or something like that from...