Search results

I've been into single rotors since 91.... have ran castle for as long as electric single rotors existed,,, I personally lost 2 700 models, one 3d, one scale due to castle.... with stuff like that you get one chance with me, then i'll look past that stuff like it never exists. Maytec and T-motor...

I've answered this a few times in the superX thread, see how your shoiwng a yellow wire from the osd,,,, you need to use the white one on that piece and that piece only, that's why it's so lame. XA decided to rewire the world with the wrong color wire.... surprised red means positive....

gh4 has an option to output 1080p to the hdmi, it does not change anything in the rest of the cam, still rolls 4k internaly. the 4k is for the external recorders and you guys with zen aint gonna be swinging that anytime soon

I honestly have no idea whos manufacturing for who but know for a fact this isn't some relabled esc with some crappy open source firmware and they DO NOT have commutation problems with any of the kde offerings. Castle has burned more people than i can ever remember in rc history with there IVE...

kde is releasing esc's made for these motors... i'd wait the minimal time and get em as a matched kit

Yuri, i figured out that flashing,,,,, hahaha, friggin dog was walking around triggering the sensor activated light.... hahaha... I was worried about that.... was trippin this morning when you mentioned the manual mode,,,, that's all i use now and looked that dam camera over for an hour trying...

theres a lot of people with alot of questioins, but that is where this "kit" is developing. it will be a rtf kit in another month Pretty sure there on gens-ace, effinerz a member here is the MAN on efficiency around here to the best of my knowledge They have gone through 13 motor winding...

this thread, gotta read back 20 or so pages to see the 12km flight.... the trick is low draws, next trick is high density lipos with just enough c rate to make it all work http://fpvlab.com/forums/showthread.php?26271-AerialMob-Arm-Extensions/page77

that's fine, but that's a consistent number that it becomes like leaving a light in 3rd gear.... The part about these things breaking up cause they can hover an hour in wind is crazy..... Efinerrz here has well past an hour and the things u8 on a cf frame similar to a cinestar.... the discos...

they must really not see how this industry is..... anybody and i mean everybody shooting pro is on 3 axis gimbals, most 2 man operation..... too bad, missed the mark yet again.....

whatever it is, in the field on my 3500 watt generac it never makes it to 24.9v and chops off, at home on the wall i get 25.2 all the same except the outet....

below 35-40% throttle is where the loading is too low to respond to,,, like 32% hover and your likely a toilet bowl

there little ones are 48 kilos, make 110 watts and you can't even find a price.... that usually means if you gotta ask...... fuel cell technology is still awefully new at this point at the consumer level the eu run forever on nothing,,, you'll dig it

the is only three wires in a system, power, ground and signal.... powers and grounds all go to the obvious, the only wire that goes in and out is the video signal, the signal wire comes out of a camera into an osd, out of the osd into the video switcher, out of the switcher into the vtx, then it...

a premier time lapse,,, 4k, gh4, voightlander .95

its super simple,,, the vtx needs power, most likely 12v so get a buck regulator... some are 5v, identify it... ground all them together into a regulator, the yellow wire is typicaly the video signal, the part that gives the picture. on the ground it'll all be teh same. Alot of times your...

not sure, i'm on kingston Would love to shaun, but got flight school in the am,,,, no way to swing both

thank you sir, have a 60 size electric and a 72" gasser extreme flights too, but the multi bug bit me and never looked back.... obviously had orientation of models sorted before coming this way.

dunno why they lockup, it never seems like the hero thing where the memory would malfunction, it's more like the firmware is still buggy..... was hoping this wouldn't happen, the one we borrowed was the same exact way. I'm just doing stills, super simple stuff, but only once so far,,,, this...