Search results

It looks like mine does when i hit the failsafe switch.... it could be a real failsafe if you didn't.... mines opposite my landing gear and two rig have two radios with the spring loaded switch on either side so there different, i hit that dang thing once a day at least till i get used to whats...

we've had one major crash on set, it was attributed to blowing a cell and the whole thing wigged out..... came down like a bag of rocks so however your running it and thinking somethings better there, good luck You'd be surprised how a few grams can change everything. on a disco 20 grams is 3...

if one pack goes open cell in a 2 pack system being wired parralel does nothing, other than drag the whole setup down anyways. only reason to run 2 packs is to give more amperage rating..... and leaves a break point because of the ability to not plug both packs in and fly, ie systems setup to...

i don't have one of these, but i think it powers from the can buss cable it links to wookong/a2 with

yep, video tx and rx still needed unless you got a really long cable to hardwire it all.... yea, most of these come with what you need to wire it, but sometimes not so much. for sure the immersion does come with cabling, but i think it takes a rca barrel connector.... i take and open up the...

10x20 is plenty, we just need lots of tables

That's awesome Chuck. I look forward to helping you reach the people....... Were gonna need some bigger tables..... mine are 4' motor to motor

that's what we use...

that sounds right propless... a fully loaded disco depending if you can ff and get the amps to drop through technique. your shooting for 7.5 amps ff, you'll see it peak up into 8-9 amps and if you do, that should get you 18-20 minutes... at that point it comes down to grams of extra stuff you...

it's very near, had to redo all my quizes (check) gotta pass my oral stage check and take a check ride,,,, then there jumping out. the last trip or two has felt good enough i feel i'm ready as long as nothing major goes wrong..... he's got these vacations so we're both dragging heels but as soon...

The thing making 12v is suckin,,,,, start a ticket at team-blacksheep.com and somebody will sort out whats going on. sometimes when you passed on to specialized care, they like to see macro pictures of the boards cause sometimes the chips get blown off during builds, i've been guilty myself...

not normal, sounds like you have a big vtx running off core. what all is the video gear and what voltages?

I can't really see, you would be looking at a macro picture of the area the prop sits, twist the motors till that level is laying on the area flat on both sides....

missed the what are you on now,,,, it's a 2012 skyjib v.2 hl with the AMP 65 amp maytec simonK with 3520's. it's been relaxed to gh4 duty, 15" props, flies crazy smooth, looks like a simulator

like you got there with the bubble level is perfect, from there you gotta get what the level is sitting on flat under the level, then you turn from the back motor to the one in front of it and do it again. your trying to make the props all flat and level,,, if you have 15" props once the backs...

I test in ocotillo alot, we film quite a bit out in anza borrego and Ocotillo wells just past that and were up in the palm springs area a lot doing something or another. were in so cal so it makes since.... Thursday i'll be back up in Palm Springs again... bet i make the top 5 on the board for...

put the motors straight and you'll be shocked how long it flies.

a ruler or yardstick or piece of wood, metal, anything perfectly straight.... you hold it down on the motor surface the prop sits and spin it into the other motor, do the back first cause there 45 degrees from each other. then align the fronts to the backs using the same method. anything but...

we replace the plastic part for free, you pay shipping, file a support ticket is best absolutely, the motors try pulling the rig around the direction there offset and the algorythm doesn't know how to deal with it. They have to be dead on

they have to be dead on...... some inner mounts have had issues with the insert alignment to never let this tune out so if it doesn't drasticaly get better hit me back and i'll get you some replacement parts