Search results

http://www.youtube.com/watch?feature=player_embedded&v=HBTWl-DtKdM <!--[if gte mso 9]><xml> <w:WordDocument> <w:View>Normal</w:View> <w:Zoom>0</w:Zoom> <w:TrackMoves/> <w:TrackFormatting/> <w:PunctuationKerning/> <w:ValidateAgainstSchemas/>...

What FC are you using? I use 11" Groupner with DJI WKM, had 13" APC but WKM dint like them. Flys much smoother with 11" props TOW 5.5kg

I always take a note of all the settings and then reset everything to default after a firmware upgrade then input all the data. It's a shame PH don't have a "Save all" feature that just writes back the data/settings to new firmware.

Don't forget that forums usually attract post from individuals with problems or from those in need, it's rare that people post good new, amazing results or trade secrets.

Same problem here, jitters (mainly in tilit) using RSGS, no jitters when deactivated or using WKM as gimbal stabi. Would love to know the answer if any one is using an AV200?

I had this problem even when suspending the frame from the ground, it doesn’t help that Photohigher don’t say if you need the resistors plugged in like you do with tilt and roll so I added the variable pot that came with the original servo and re-connected that. After a small adjustment it...

Decided to go for the nano tech 4s 5000 40c instead, almost the same as my Hyperions but higher c rating and in UK stock.

Thanks ST, I can't find them available in the UK. looked at HK but only seem to have 5000mah in UK stock

<!--[if gte mso 9]><xml> <w:WordDocument> <w:View>Normal</w:View> <w:Zoom>0</w:Zoom> <w:TrackMoves/> <w:TrackFormatting/> <w:PunctuationKerning/> <w:ValidateAgainstSchemas/> <w:SaveIfXMLInvalid>false</w:SaveIfXMLInvalid> <w:IgnoreMixedContent>false</w:IgnoreMixedContent>...

Thanks for your help, will give this a go

Sorry I don't have the answer but this is the problem I'm having also, are you using the AV200? there must be a fix as others seem to get great results, all I can say is that i'm running 1.17beta firmware and I din't have this problem when using the DJI WKM stabi, it was silky sooth with the WKM...

Did another flight today and had intermittent White and green flashing lights, been on firmware 5ands for some months now without any issues. No problem previously, the White and sometimes green flash occurred during very sedate flying, after landing I spun the hexa by hand (no motors running)...

Not on my set up, I'm running firmware 5.04 and not the 5.16 that has this feature, any more ideas?

I had 3 flashing gree lights repeated intermittent during a flight yesterday on my WMK. I don't have IOC activated, anyone figured it out?

I've seen this in some close ups but haven't seen it available here in the UK, do you know where I could get one? I'm sure this may help.

I do get some unwanted movement on the bench but only when I roll the gimbal, not the tilt. I believe this is the stock servo dead band and I would upgrade the servo but my problem is a general vibration/shaking of the whole gimbal due to a lack of rigidity between the airframe (AD6 HL) and gimbal.

Thats the problem I have, vibration/shaking when I use the AV200 with the pan kit fitted. I get very good results without the pan option but as soon as i add the pan kit there is too much shaking of the camera, even with the pan gear compression bearing upgrade. As soon as the gimbal is mounted...

Hi Nic That looks great, what frame and gimbal do you use

Tom, did you add the resistors to pot as with the tilt and roll servos?

Thanks Ross I can see what you have done and I think I will follow this method for now, my apologies to mounirz who made the original post.