What cool stuff can I do with my spare channel?

M

Mon0bLE

Member
Hi, sorry if this is a really noob question, but I've only just started out and would appreciate some help. So I've got my DJI F550 setup nicely and I've just added FPV, but I had a thought....
I've got a Spektrum DX6i and an AR6210 receiver, and I think I'm right in saying that 5 of the 6 channels are in use by the Naza:
Aileron
Pitch
Yaw
Throttle
Gear (MANUAL/ATT)

So I was wondering what could be done with the last channel. For example, could I just connect a servo and have it so that when I flicked a two position switch on the transmitter, something could be dropped from the multirotor like a "carepackage"... How would you configure the two positions for the servo? I've only ever used the Naza Assistant software to do stuff like this (i.e. Gear switch configuration).

Is there anything else that I could do with a single channel and two-position switches?? Any ideas? I'd appreciate it...

M.
 


AEA737

AEA737

Member
nytram said:
Turn some lights on and off?
Click to expand...

You can install these lights from Hobbyking:

http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=23792

Plug them to the spare channel of your receiver and power them with your flight lipo. I bought a 2 meter long aluminium rod and bent it like a Christmas tree. It is locked to the F550 arms with zip ties. I fly it at night and the kids (an not so kids) love it. You can cycle 9 combinations of colours/flashing patterns with your receiver. People think they are seeing an UFO:nevreness:

View attachment 8517

If you want to drop something from the F550 this is what I made to drop water balloons from my Trex 550E helicopter:

http://www.helifreak.com/showthread.php?t=386669

I bought this quick release mechanism from BVM:

http://shopbvmjets.com/zencart/index...qj0dbt5899c652

Have fun!

Javier
 

Attachments

  • photo.jpg
    photo.jpg
    136.2 KB · Views: 302

M

Mon0bLE

Member
AEA737 said:
You can install these lights from Hobbyking:

http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=23792

Plug them to the spare channel of your receiver and power them with your flight lipo. I bought a 2 meter long aluminium rod and bent it like a Christmas tree. It is locked to the F550 arms with zip ties. I fly it at night and the kids (an not so kids) love it. You can cycle 9 combinations of colours/flashing patterns with your receiver. People think they are seeing an UFO:nevreness:

View attachment 11097

If you want to drop something from the F550 this is what I made to drop water balloons from my Trex 550E helicopter:

http://www.helifreak.com/showthread.php?t=386669

I bought this quick release mechanism from BVM:

http://shopbvmjets.com/zencart/index...qj0dbt5899c652

Have fun!

Javier
Click to expand...

Thanks, thats really helpful. I'm gonna try and find a quick release thingy here in the UK... or i might have to make one... Thanks again!
 

kloner

kloner

Aerial DP
you can assign one channel to gains so you can mess with them and see what they do

that receiver isn't compatible with nazas failsafe. if it looses signal i'm pretty sure it'll go out of control, not hover
 

Bartman

Bartman

Welcome to MultiRotorForums.com!!
check out www.canakit.com. you can do all sorts of stuff with the arduino platform. i bought the starter kit to get a feel for things but they have all sorts of little projects that might be fun to adapt to a multirotor heli.

bart
 


You must log in or register to reply here.
Top