Mounting location suggestions on a F450

[goldsworthy]

I have a F450 and I am putting a 600mW transmitter for my Fat Sharks and tiny camera as well as a ezosd. Thats alot of stuff on such a small quad. Has anyone done this? If so please give me your ideas on the mounting locations that will work best.

 

[kauaicuda]

I make a little tx mount that works well.

http://www.rcgroups.com/forums/showthread.php?t=1618092

 

[kloner]

On mine, it's got the vtx on the bottom of the top plate with the battery strap keeping it up against the plate, it sits over the top of my naza thats on the bottom plate. i use a 12" extension and put my cloverleaf up on a short piece of cf rod. that way when i crash, worse case scenario is a broken carbon rod cause i crash

you can see the yellow/white wires up under the top there..... flawless video out past what my 2.4 reaches. been 2200 feet and hit failsafe all the time

 

[Tahoe Ed]

I have mine mounted off the rear tab with 4" LG to get the Blue Beam antenna out of the dirt. I have switched to a Mondo Stinger 5.8gHz 500mw with a sony camera mounted under the front tab and Eagle Tree eLogger with OSD Pro mounted on either side of the lipos on the top plate and GPS mounted on one of the arms. If fly with two lipos, a 3S 2650 for flight and a 3S 1000 for the vTx.