Maybe the best LCD for FPV:Diversity LCD Screen Receiver Monitor

F

fpvmodel

fpvmodels
new great item going to release to the market soon.
http://www.fpvmodel.com/diversity-lc...-ghz_p468.html

IMG_1073.jpg

IMG_1072.jpg


5.8 GHz Diversity LCD Screen Receiver Monitor

Specification:

Screen size:7”
Screen type: TFT LCD Screen/long life, LED backlight
Resolution: 800*480
Brightness: 450cd/m2
Contrast: 500:1
View Angle: 140/120degree (Horizontal/Vertical)
Working Voltage: DV 7-12V(center positive) or 11.1V Li-battery
Power Consumption: < 8w
Size: 180mm x 120mm x 23mm
Built-in 5.8Ghz Dual diversity receiver automatically for best reception
Built-in 2CH 5.8Ghz AV output and 1CH AV input
Support 9 languages menu selection
Working temperature: -10℃~+ 65 ℃

Features:
Built-in Dual Receiver Automatically for best reception Automatic Antenna Switching
Dual buffered AV outputs
Can receive 2 different channels at the same time
Not affect by 2.4GHz R/C Radios
AV Receiver with Diversity inputs
Small, light weight, durable

Working frequencies
CH1: 5705MHz
CH2: 5685MHz
CH3: 5665MHz
CH4: 5645MHz
CH5: 5885MHz
CH6: 5905MHz
CH7: 5925MHz
CH8: 5945MHz

Operation Instructions:
　　　
Screw the antennas and then power the LCD screen. Power LED is on and RX1 and RX2 are flashing alternately. RF1 is to RX1 and RF2 is to RX2, better signal first.(See Figure1). RF1 and RF2 must be in the same Channel.
Plug AV cable to RF1 AVOUT and connect the other end to the Monitor, then you can see the signals from RF1. So does the RF2 AVOUT. RF1 and RF2 must be in different channels to avoid signal interference. (see Figure2)
Plug AV cable to any of the two AV IN ports, LCD will switch to the AV in Automatically.
Buttons (See Figure1) ① POWER: LCD power on/off button. ②SOURCE: Selection for AV1 and AV2 ③MENU/DOWN: Setup-Brightness, Contrast, Color, Language, Image Rotation, Options-zoom 16:9/4:3, Auto turn off (5s/10s/OFF), Rest ④MINUS: Down ⑤PLUS: Up
 

kloner

kloner

Aerial DP
pretty cool, that's what i wind up making out of parts.....

You know what'd be really cool, include a dvr with an SD slot so they can pop the memory out. That'd make it a complete package above and beyond

this is like the RC305 and 805 type video frequencies?
 



Droider

Droider

Drone Enthusiast
I use mine on the #2 video output from my receiver. #1 goes to my Liliput monitor which although is a very nice picture blue screens sometimes, with the little monitor at least I still have a picture although it is a tad small!

Guess there is always going to be something better round the corner eh!

Dave
 

P

Phil550

Member
Droider said:
I use mine on the #2 video output from my receiver. #1 goes to my Liliput monitor which although is a very nice picture blue screens sometimes, with the little monitor at least I still have a picture although it is a tad small!

Guess there is always going to be something better round the corner eh!

Dave
Click to expand...

Which Lilliput monitor have you got? Do you think it would be better than the one sold by Firstpersonview -
http://www.firstpersonview.co.uk/video-goggles-screens/8-fpv-screen

I'm looking for one to go on the AVout from my newly acquired Attitude goggles

Phil
 

F

fpvmodel

fpvmodels
Good question, we are asking factory to make it for next Generation:tennis:
yes same as RC305 &805
kloner said:
pretty cool, that's what i wind up making out of parts.....

You know what'd be really cool, include a dvr with an SD slot so they can pop the memory out. That'd make it a complete package above and beyond

this is like the RC305 and 805 type video frequencies?
Click to expand...
 
Last edited by a moderator:


You must log in or register to reply here.
Top