So decided to try it out again today and see if anything changed (knew nothing changed just that mentality of hope). It took off just like all the other times perfectly fine and was able to hold a hover without an issue. Then noticed every once and a while it would stumble and I would have to keep giving it a little more throttle to keep the hover going. Well then at the last minute as I was maybe a foot off the ground a motor conked out and the quad dropped and as all of the motors were idling this one was just twitching. Decided to move it to another ESC to see if it was the motor that died and it seemed so. Well the kicker here is that last week decided to order another motor and some props as backups (motor arrived today, props not yet) so excited me figured hey! There's my issue! Threw the new motor on, flew around a little and flew fantastic. Then it started happening again and bam this one conked out as well! Started doing the exact same thing with the "motor twitch". Felt the motor, it wasn't hot, I could touch it without an issue, same with all of the other motors. I did touch all the ESC's and none of them were very warm but I would say the one that killed the 2 motors was a little warmer to the touch than the other ESC's. So! after this mishap, now I'm 2 motors down. Does this mean that the ESC has been the problem all along?
