Search results

James frustrating experience by far but re: "DJI, I'm coming home..." Good luck getting the DJI CEO to respond, and in fact good luck getting a NAZA to come home. If you're giving up on 3DR, take the opportunity to try something other than DJI.

How's the balance to the CG? Maybe lower the yaw setting?

I cannot believe it has been a year since I posted the start of this thread...wow where has the time gone? I would suggest disconnecting GPS and flying in ATTI mode to see if you have the same problem. Also, are all the props tight and wiring good, particularly motor #2 where you seem to lose...

Couple suggestions: do you have a high center of gravity? Landing skids may be too short?

Hoverthings HT-FPV black frame with red front arms completely assembled with power board. Flown 20+ times with one crash that cracked a front arm which has been replaced. Frame is in good shape with no damage. Two extra rear arms and one extra front arm just in case...you know. Completely...

I the frame out of alignment or anything bent?

"The Law Enforcement market is untapped and ready for UAV." Oh this just makes me sick to think about.

Here are a couple things I confirmed/corrected when flipping: 1) Confirm the props are going in the right direction and mounted correctly. 2) If you unplugged a motor and plugged the wires back in in different order, the direction/polarity will change. Make sure the motors are spinning in the...

Thanks! Oh the power of this forum and the simple things. Thanks everyone for catching the naza orientation. I just had to try it here at 2am and you were all right. I had the naza pointed in the 11ish oclock position instead of straight forward. I re-mounted straight forward (motor labels...

Redridinghood, could you take a look at http://vimeo.com/37874203. Any suggestions on gains settings?

Update Thanks for all the suggestions and ideas. Here is what have done: 1) double traced all motors to the right M1-6 on NAZA 2) double checked the prop spin directions are correct 3) adjusted gains in naza auto pilot - I have not done anything on futaba TX It is still flipping when over 50%...

I have a DJI F550 just itching to fly but keeps flopping over. The f550 oriented in X6 is controlled by a naza with tiger motors powered by a 3S 3200 mah battery. Futaba 8fg super tx and futaba r6208 rx. I am able to get the motors started both in atti and manual modes. But when throttling...

Yup Second that. Easier to go after tax payer with an RC than the homeless encamped in the park.

I am considering the F450 for my first build. I prefer to have a little more power in the motors given the windy conditions around my area. The time I put a camera and FPV camera, I am concerned about power and wind. Any suggestions on more powerful motors that will fit the F450 mounts? How...