Search results

  1. fltundra

    Frequency interaction between video TX and Garmin dog tracker - What to do?

    Soon as they release firmware, you will be able to send all your telemetry with the Crossfire, and move to 2.4g instead of 5.8g for video.:) 16 channels are just around the corner also.
  2. fltundra

    Frequency interaction between video TX and Garmin dog tracker - What to do?

    You just need to get the TBS Crossfire. There's nothing out to compare it too. It's the first time I don't have to think about RC control link anymore, and with the receiver beacon you can always find your lost model with the GPS cords or radio direction finding. Plus all the two way telemetry...
  3. fltundra

    BeStableCam Pre-Black Friday, 25% off for all

    SteadyGo3 3-Axis Aerial Stabilizer
  4. fltundra

    BeStableCam Pre-Black Friday, 25% off for all

    Are you shipping the old or new version? Is it 25% off of 319.00?
  5. fltundra

    Aeronavics / Droidworx SkyJib X4 Crashes Testing Failsafe

    All you have to do is remove any excess solder from the pads before you solder the new ones on. About the only way you could damage it, is by overheating the pads. http://www.amazon.com/ECG-J-045-DS-Watt-Desoldering-Iron/dp/B00068IJSG
  6. fltundra

    Show what you filmed - Post Your Video Here

    My new Z1 Tiny 2 gimbal. It runs basecam 32 bit with motor/encoders. Second test flight, factory settings and calibration.
  7. fltundra

    Anyone check Tx control frequency for problems before flying

    The Crossfire does a nice job of hopping. Amazing range even at only 10 mw output.:)
  8. fltundra

    Anyone check Tx control frequency for problems before flying

    I have the ISM combo and find it to be very useful for mainly checking noise floor and ch selection on 2.4 ghz band. As I fly it for video, and 915 mhz control. I think it's must have if you fly in different densely populated areas. Also great for checking TX pwr output on lower bands, and has...
  9. fltundra

    Gopro 3 Axis Gimbal With Encoders.

    http://www.zhiyun-tech.com/index.php?m=content&c=index&a=show&catid=75&id=64 http://www.rcgroups.com/forums/showthread.php?t=2490735 Nice review: Dude wearing shorts riding at crazy speeds handheld models gimbal test. Latest version, different mounting bracket.
  10. fltundra

    Battery Connectors

    Anti-spark http://www.getfpv.com/accessories-78/power-cables-connectors/amass-as150-7mm-gold-plated-anti-spark-power-connector.html
  11. fltundra

    "Drone" Radio Live, 4Nov2015, RealFlight "Drone" Simulator Review

    Your doing better then I could do , so no worries. You will only get better at it.:)
  12. fltundra

    "Drone" Radio Live, 4Nov2015, RealFlight "Drone" Simulator Review

    I thought you did great! Parts like loading software and computer requirements is when I lost interest. If you are going to install software live. You really need a I7 laptop with SSD drives. ;) .
  13. fltundra

    Shotover U1

    Shot-over obviously didn't do there homework! No one with any common sense that has been around would ever use an A2. SuperX would fly that beautifully with a pilot that actually knows how to fly.:)
  14. fltundra

    Pre-release footage from GoPro Quadcopter

    Gopro missed the boat long time ago. I don't seeing them having any chance against the phantom. They will screw it up one way or another. Only time well tell.:)
  15. fltundra

    Inspire 1 Product Change Notice

    Do you guy's ever get anything right the first time!
  16. fltundra

    Tiger-Motors U8 + 28x9,2 props

    Turbine on a multi. That's not going to end well.
  17. fltundra

    What just happened

    What brand prop broke at the hub?
  18. fltundra

    Flying United with big LiPo's....?

    My friends dad makes avionics panels for Boeing and MD. I am the only one of our group of friends that has been allowed inside to tour the facility.:) http://www.gableseng.com/video/high.htm http://www.gableseng.com/b777.asp
Top