Search results

Hi it is a Coax setup, I'm flying in warm Florida at sea level SleepyC, when I was building this setup I had the motors first with Maytech 65A Opto ESC, I was having commutation problems, so I change to the T-Motor 40A pro ESC suggested directly by Tiger and problem solved, I did a small...

Guys I wanted to cross reference the flight times some of you guys are getting with your setups a respected member from another forum mention that with the same motors but with Microkopter BL3 and MK FC he was getting way more time in the air Im currently flying a CS8 coax frame with T- Motor...

Hello im Parkland Coral springs Aerea

Hi Baja King what is the advantage of changing this motor mixer over the standard DJI coax mixer? tanks

Hi im flying successfully a coax 8 copter with DJI A2 electronics i need advice on fine tuning the motor mixer the reason is that the bottom motors are warmer than the top motors making me to asume that the bottom motor is working harder or pulling more amps than the top motors I have already...

Can a dji zenmuse h3-2d be upgraded to a h3- 3d ?

Are you guys using the normal CP or the CPHV When you guys (users) compare it to a tuned AM32Bit what are the main differences in your real life copters that makes the CP superior other than the price thanks

Hi Samur what are the reason for the stabilization been compromise by the RLG? is it in the air wind resistant pushing on the legs disturbing the gimbal? in land the flying copter yaw's spins could you mention what are the RLG-specific modes going to do will they be automatic sensing or user...

Well I must say Im liking the X configuration a lot on the gains its kind of hit and mist, what I did is put the roll and nick gains on 1 a knob and the attitude gains on the 2nd knob of my futaba radio i found out "i think" (need more test to verify more firmly this) that in calm wind flight I...

Some guys at the Freefly forum are using a mixer similar to this and like it a lot, also are you guys getting actual number in the boxes of the advance mixer menu? Quinton where did you get the digits (100) Mikrocopter FC mixer window had values of 64 and -64 across all of the mixer boxes as...

Guys do we know or have an idea if some of the A2 crashes where in flat copters, or Coax copters, or both?

To all X8 Coax setups experts questions: 1 Are you using DJI x8 (Octo-rotor X) mixer as it is, Top props counter clock rotation, bottom prop clock rotation? or are you modifying this setup 2 Are you using same size props for top and bottom motors? 3 Do you know why in the advance motor...

I have ask my local big DJI dealers that also have a repair department in house about the A2 in a hush hush way trying to get them to honestly tell me their point of view on the A2 they say "not one problem" I know they could be bias in favor of DJI.....or not........after all they need to...

The A2 gives the user trough the Assistant software the option to adjust parameters in the advance motor mixer window assuming that the default is the general way to use it the default is set 0% I wonder what 0% means? Mikrocopter FC mixer window had values of 64 and -64 across all of the...

Thanks Kloner this Tiger ESC are the only ones that say Pro, have a black label and come in 30A and 40A, with no Bec, what the Pro exactly means who knows they do say Opto so I asume that Opto means they are set up for MR use I check the programing settings on all of the ESC and they where set...

Hi I finally did my test with the T-motor 40A Pro Esc paired with TM U5 motors flight went well motors started smoothly, no issues what a difference, ESC and Motors where slighty warm after 8 minutes of hover at 22.5 AUW 2x 6S 10k Lipos 52% left on each. the ESC came programed but I check each...

Guys Im flying a CS8 frame with A2 FC I mounted the IMU right in the middle of the copter on a separate smaller CF plate with silicone servo tape, the plate rides on 4 rubber short standoffs I have not have an issue...... yet..... I was wondering if we should do a IMU calibration more often...

And to bang on the same drum on and on it is not the same to crash phantoms or smaller copters with Naza FC than crashing copters using A2 or a WKM FC this copters generally are heavier lift copters with expensive gimbals cameras etc plus the weight and size makes them very very dangerous, the...

Just as DJI comes out to advertise a new product in this forum they should come out and acknowledge that there are issues with the A2, or defend that there are no issues with the A2, I also would like to read something related to the A2 issues from the big DJI dealers to voice an opinion what...

Anthony you couldn't have said it better I for one have not had an incident yet.. related to a suden, with out warning, surprise A2 crash .........but Im so terrify to use it