Search results

Soler, some help needed. just went throughout the iOSD MK II manual can't find how to access the data from it. is there any link where it explains how to access the data from the iOSD Thanks Ramesh Tahlan

Hi EastCoastJib Thanks for that link. looks like i will have to orders the ones u recommend. Ramesh Tahlan

Leofuica. thanks for that input about vibration. I am now taking measures to reduce vibration on IMU earlier i had installed it the way dii says - just install with the double sided tape provided as damping is done internally. but on this particular Octa i had used the damping pillars that...

I am using Hobbyking Blue Series 40A SBEC http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idproduct=11430 In case u feel these r not reliable, would appreciate any suggestions. in two days time i should have the whole setup ready for testing so if u suggest some really good reliable...

flynox thanks for that input.. could have have thought such a thing could happen well have a lot of test to do on escs before i take the machine up again. many thanks buddy

Hi flyonix. I have had esc failures in the past, and the mcopter would start to rotate first, as i would see the rotation start on my video monitor first and then realise there has been a failure up there. and while coming down would start to wabble also and go out of control However in this...

soler thanks for that input. its gonna be one hell of a time to figure out which log. hope its also in graphical form, that way at least the altitude slop will show near vertical loss of ht from 80m to ground in less than 4 seconds. but will certainly go throughout it. may just come out with...

Hi ProPilotWanaBe, I have been trying to figure out the root cause, but just can't understand how. The octa was hovering perfect, on height hold mode. and on her own nose dives into ground. That is why i said won't use this particular WK M again on a camera mcopter. How many cameras can one...

Hi all have been using WK M for over a year now. Using on my home build OCTA, wheel dia 800mm was flying on GPS, and height hold at 70 meters height. Had the Z15 go pro gimbal and Hero3 on it. suddenly it nose dived and crashed. Gimbal damaged. camera safe of what ever was left, powered up, all...

and an Australian site says S1000 is for $ 3,900 which sounds a bit better. but i think dji has priced it a bit too much on the higher side. http://www.nbhc.com.au/dji-s1000-octocopter-djis1000evo/

ok... found a shop in Ireland that says the S1000 is for 9,999 Euros thats $13,743 something definitely wrong. If the EVO is $3000 and its price is dropping, the S1000 cannot be over 4 times that price ?????? here is the link http://quadcopters.ie/flying-platforms/s1000-octocopter.html Hope DJI...

DJI that S1000 is impressive as was the s800 EVO and the earlier S800 have assemble and test flown both machines in the past, and can have only praise for them Looking forward to buying the S800 for myself for a change. Pre-orders are on for $500,BUT can DJI or someone please give a price range...

The IMU relocation is not for the Multicopter S800 controller... it is for the IMU of Zenmuse Z15 which stabelised the camera gimbals. The WKM IMU is still mounted with the thin double sided tape which comes with the IMU. I always install my controller IMU at the center of the body. No problems...

Hi everyone So far i have had not problem on MacBook Air with Windows7 loaded on it and with set up or changes to me made for Wooking M However. I have got the Data Link now and have the One Way Point with it But the CD which came with it does not load / install on the MacBook, and i am starting...

hi CT Aviation down load the wkm manual the last page gives u the setting for s800 though it is a Hex it is a good point to start and the setting for and Octa are not very or soo different to a hex just a bit of diff only

Olli that is great What i have done is that there is just one wire of S Bus coming from multicopter to the cam mount and yes.. if i do too may rotations it gonna wrap around.. have bought one more Futaba Rx so one of these days will change over the cam operation for single pilot with my second S...

jonesjj hi,,, 14FG is good to go and u can use any radio for multicopter Ramesh

Hi Ollieleven finally got it i have programmed Radians on my Futaba 8FG using S bus hub at Rx and took one line to Radians I have used ch 9, 10 and 11 for the radians Perfect Made two mistakes and that is why was having problems Dont click "Off unless using Spectrum" and programme Radians one...

Hi Ollieleven okey... here is the problem WKM has IOC default to Ch 5 and Radians have Mode default to Ch 5 also So impossible to have a one pilot operation. Unless Radian guys can come up with a software which allows default to be changed to a channel of choice And using two Rx bind with one Tx...

hi again Just spent the last 2 hours + on trying to set up the Radians with the other output of SBus Hub... NO LUCK. I has already programmed ch 1 to 8 for the Wookong M on S Bus So this was my set up for Radians which did not work ch 9 - Mode for Roll and Tilt Radians and for Tilt Radian.... Ch...