Search results

  1. Benjamin Kenobi

    Can't get out of vertical compass calibration

    Hmmm, are you calibrating correctly? I guess you are since you've been doing it successfully with the Naza Lite but worth checking your procedure. Enter calibration mode by flipping the mode switch (something like 7 times). Do horizontal calibration with nose facing away from you. Light...
  2. Benjamin Kenobi

    Rotating Hexa

    Agree with Jim. Check your motors are level. I had the same issue with my old S800. At full throttle it would lose yaw authority.
  3. Benjamin Kenobi

    Problem with atti and gps

    How about the setup in the assistant software? Correctly entered the positions of the GPS and IMU? Do not try RTH unless it flies perfectly in GPS mode. RTH is a GPS mode. Is your GPS puck pointing the right way? The lead is supposed to point forwards. Feel free to post pics of your setup and...
  4. Benjamin Kenobi

    Another Noob from England

    Hi John, Welcome to the forum! Lots of helpful folks here. See you around! :)
  5. Benjamin Kenobi

    RANGE!! Whats your distance

    Hey Tim, Well that's around 420m so a little bit short. Power lines do cause some local magnetic interference but shouldn't really affect the range unless they are directly between you and the aircraft. Humidity also reduces the signal. Also, the position of the antennas on the aircraft. I'm...
  6. Benjamin Kenobi

    Advice on rig to deploy shark fishing bait offshore

    Hi mate, I'd give the autonomous bit a miss and just do it manually. The problem will be getting your aircraft to stay stable when you drop the 2kg weight as the weight difference before and after is quite large. How about a ground mounted air cannon type thing? Or a little radio controlled...
  7. Benjamin Kenobi

    GH4 Gimbal other than Zenmuse

    Yup, I see what you mean, not working!
  8. Benjamin Kenobi

    Naza gains seem useless?

    Hey Tom, By default gains do you mean 100% or the ones in the manual? I found the ones in the manual way too high. 100% is too low and would cause a wobble. I have mine roughly around 140% across the board if that helps.
  9. Benjamin Kenobi

    GH4 Gimbal other than Zenmuse

    Why doesn't it work or how doesn't it work?
  10. Benjamin Kenobi

    Humbled...

    Hey mate. So sorry to hear about your crash. I feel your pain. I honestly don't think the walls or structures were the problem. I've flown in places like that before such as in the middle of the city and up the side of a skyscraper without incident. It was a second-hand aircraft so there could...
  11. Benjamin Kenobi

    It happened.

    If it's not on every news channel then it's fake. But yes, as above just read through the comments under the video and it's clearly just a fake. Done by a guy who does 'viral' videos. I think sometimes the term viral is misused to 'make an outrageous and shocking video just to get the name of...
  12. Benjamin Kenobi

    Zenmuse GH4 Owners thread

    Yep, sounds like the lead. Order a new one and you'll be good to go. ;)
  13. Benjamin Kenobi

    Zenmuse GH4 Owners thread

    HDMI lead? The solid light on the zen means convertor working but no signal from camera received. The lead is also the same as the Zen BMPCC (micro HDMI). Or possibly a camera setting? All plugged in correctly (plugs seated all the way in)?
  14. Benjamin Kenobi

    which urban filming rules in france?

    Here's the response I got: If you want to operate in France just one time, you must send to this address travail-aerien-bf@aviation-civile.gouv.fr : 1) Copies of your : - operations manual or any documents with your operations procedures included - your national aviation authorities...
  15. Benjamin Kenobi

    About the man carrying multi-rotor flown by Alexandru Duru

    Awesome!!! And it looks homemade which is inspiring. I want to make one!
  16. Benjamin Kenobi

    Hi from Amsterdam

    Welcome to the forum mate! :)
  17. Benjamin Kenobi

    Wookong Flight tuning

    The WKM is known for a little bit of drift when yawing. Your gains are also quite high (mine are around 140%), but this isn't your problem I think.
  18. Benjamin Kenobi

    Motor cut off delayed when tipped over

    In intelligent it takes 3 seconds to turn off the motors. Immediate is immediate! :) I have my idle speed on the middle setting (as per the manual).
  19. Benjamin Kenobi

    Motor cut off delayed when tipped over

    Do you have cut off mode set to immediate or intelligent? :) Also, look for the source of your death wobble, that's not normal and usually caused by gains to low.
Top