Search results

I solved half of the problem and found another half. I couldn't get gimbal to work because i did my tests with tilt output which doesn't work. Roll axis works fine, tilt doesn't work at all.

Thank you!

Take a look at the article you gave me a link to. 8. After removing the propellers from your multirotor, connect the the battery to your main power connector and turn on your Radio.9. Click the camera mount on check box. At this point your camera mount should become active. Are you sure i have...

Yes, i have all that!

I am glad for him. Shell i film a video to prove it doesn't work? No prob! sorry for poor quality

Here comes another issue. HFP doesn't work with Cinestar gimbal (new servos). I checked : - Camera mount is ON in the setup utility. - If i plug the gimbal into naza fc servos come to life straight away. - I checked pins on HFP. I get 6v on power pins. - Recheked all connections -...

Never had Turnigy. Don't know how they sound. Tigermotors just silent i think

YAW Thanks! I will measure the temp tomorrow with laser thermometer. I had an issue with motor alignment on a smaller frame. It felt different... when I yaw it goes up like if I pushed the throttle stick. OSD sorry, i held my iphone wrong side :)

Not yet. How do I find it?

I am running Tigermotors MT4008 600kv motors and newest tigermotors 30A ESCs 400hz. They are out for a couple of weeks i think. I couldnt find a single picture of them on the internrt. They are black with white labels and integrated motor connections. They dont get even warm. Will try them with...

I rechecked everything. OSD connection is correct for 101% I do not see OSD info with or without camera connected to osd pins. I was told that HF customers could talk to HF engineers. Where are they?:)

Thanks i will double check I am familiar with wkm, naza, apm2, cc, rabbit.

1. i have a bunch of different controllers but yawing (AL being is ON) is the that bad in with HFP only. It took it around 3 seconds to become stable again and it was about 30 m hight 2. There is nothing to do with my camera or TX. I do not see OSD info at all. It is all about HFP firmware...

Made a first FPV flight with HFP. 1. OSD doesn't work at all. I get picture from the camera but no info overlay. We had the same issues with pixim seawolf chipset camera on another standalone osd. There is a problem related to different number of lines being sent by camera and received by osd...

Yesterday I tested AH and during 1 flight experinced something very similar to what you are describing. It became very unstable and started to lose power. I thought it could be: 1. Bettery voltage dropped very low. But later my charger filled the battery with only 4230 out of 4500, so it...

I get same results with my ship.

I join forums if only i have problems or questions, want to buy or sell. I do report on problems I found. I do not hang around just for fun.

It is a matter of preference. I find it very inconvenient. Glad it is not a problem for you. As for Performance - it is ok. Tried RTH from 10 meters away and it came to lunch position holding permanent altitude.

Yep..! Agreed! :)

Here they come :) Photornix, do not take it tooooooo serious. I will try to be a nice-tone-attitude customer, but do not expect me not to tell about problems your products have when I own them..