Search results

I have just connected OSD output to my Samsung plasma and armed motors. Camera is disconnected from HFP. I get only I message - "no signal" on the TV's screen. It means that my HFP alone does not output anything at all or a signal strength is too weak for the TV to recognize that there is...

i tried to rotate the pot back and forth and had no result :( I will try to connect it to my TV tomorrow

If I reduce servo advance it does not keep up with holding horizon making pan compensation useless :(

Firstly, thanks for your effort, Bart! Secondly, yes the video signal is on the left and it was plugged into the bottom row, the red wire was disconnected (it is a power pass through pin to power camera from VTX), the HFP was powered with 4s battery. There are only 2 wires that you need to see...

I am staying calm.... i like the AL and Manual mode no doubts ... But this thread is about OSD issues.... They do not believe that there is a problem with their OSD. If you read his post once again you can see him saying it is my goggles problem, camera problem or wrong VTX..... everything is...

1. I sent you only 2 tickets and closed 1 of them myself. 2. 10s of your posts on RCG were related to my personality when I criticized your product. 3. Tell me the place where I can find those thousands of customers? This forum here and RCG has only 2-5 new posts per day. Where are they? 4...

found anything?

5 days left.... still waiting for a promised brilliant support

:) it is battery cell voltage monitor beeping p.s. you can not take off before you hear 4 beeps indicating that motors are armed. :)

Thanks PaNt! Here is another video which clearly shows that there is no problem with jerky roll servo when the ship is on the ground and motors are armed. HFP sends some rubbish commands to the roll servo while in flight! Please, fix this bug ASAP! compare to this:

Does it make anything clear? I have not posted about this issue anywhere except this thread.

Again... why don't you read a post I wrote before a previous one?

Rabalanced the roll axis again with belts removed. Now it is absolutely perfect. The camera stays (keeps the angle) where i leave it. But the problem is still there.

Hi, Andre! I do not use HoverflyGimbal. I use HoverflyPro to drive my gimbal. I will try to rebalance me camera on roll axis once again. Thanks!

What makes the pot to fail in flight only?

Here is a video

Yes I have. It flies very stable both in manual and AL with 14in props. I like it. But ..here is another strange thing: http://www.multirotorforums.com/showthread.php?4241-Hoverfly-Pro-and-Cinestar-6-Airframe&p=52316&viewfull=1#post52316

I connected everything as you advised, disconnected camera, armed the board and waited for 3 minutes. I see only gray line moving from top to bottom all the time :( Can it be an impedance mismatch with camera, VTX and goggles?

I have balanced the gimbal with belts removed. And... why does it happens in flight only? I tried to shoot the video on the ground waving the ship all the way around. The footage was ok.

Did many test flights today trying to make my cinestar gimbal to work smoothly. Seems like I have got tilt compensation set to be ok. But I get jerky movements from roll servo. I tried to lower roll advance speed to 450 but it doesn't help. Any ideas, guys? I dont get any jerky movements or...