Search results

I am running the Naza+GPS on a F450 frame. Because of GPS/GoPro interference, I added a metal leg to the frame with the GoPro underneath. This leg frame was from the Walkera MX 400 quad. I currently have APC 9x4.7 props installed, motors are Turnigy D2830/11 1100kv and ESCs are Hobbywing...

I got the legs installed on the F450 frame and have the gopro underneath but now it is slightly heavier. No interference at all with the GPS.

The GPS antenna runs along the left side of the frame. The only wires that are in front of the frame are from the esc's. See both images. The 1st one shows the front and the second left side and receiver.

I will need to purchase the Toroid and will give that a try. No, I don't have the WiFi back for the camera. I did a little more testing. I noticed that although I don't get a steady flashing green led on GPS mode when the GoPro is on, it holds position but not locked on. I have the metal landing...

I only have the GoPro attached with no addons. I do have full gps coverage (yellow led - atti / green - gps) with the gopro off. With the gopro on, and full gps coverage, the leds fluctuates from 1 to 3 red, 1 yellow in atti mode and the same with gps mode except one led is green rather than...

Hi all, 1st post here. So I got my Naza and GPS all setup on a F450 frame using a Spektrum AR600 rx and 7DX tx. All functions setup except course lock and failsafe (tx signal loss) since the rx does not support it. The next step was to install my GoPro Hero2 on the front plate of the F450...