Search results

Hi George. Did you send the spare parts and the tested pl pro Back already? Regards Jochen

Hi, Did i understand right, that i have to do a normal update with Flash Magic from Version 055 to C055. Install PL Toolz c055 on my PC,open it and follow the steps on Georges Homepage ? Regards Jochen

I dont Think so. When i download A055 and delete everything (html) on my Mac the file is 557 Byte. When i download v055 ( old Firmware) i have to delete txt and the file is 175.551 Byte. For me it looks like the new firmware is not on the server. Or did anyone already install A055 on Picloc ...

holco, i think its not possible to download the A 55 pro Hex file yet. It is just a html document. The file is not on the server. I Think George hasnt finished.

Hi George When will the 55 A be upload able? Regards jochen

Hi holco. Can you connect Pl via USB to Pl toolz? If not you have a Problem with your USB Board.

Hi George. Update on the PL standart was no Problem after pressing the Button. But the Pro makes some problems. Same procedure as with the standart, but the red led doesnst light and there is no connection with the PC. I tried with and without the USB resistor. I will send a Video to your adress...

Thanks George . I forgott to press it. Tryed to watch the video ( im on set ), But the stupid I Phone doesnt like wmv.... Regards Jochen

Hi. I just tryed to update the Beta Firmware. In Flashmagic everything is set like in the screengrab on rotorpics.com. Also the device is LPC1769. I always get: Failed to autobaud step 1. Its the same on 2 Pl3x Any ideas ? Regards jochen

Remove the timing belt from your pan servo and have a look if something changes when You take away the pot from the mount and your hands.

My PL is not mounted on the Camera Plate. I think in this case you dont use external pots. I changed to some other servos MKDS 18 on pan and tilt . They are not very fast, but they dont jitter and its possible to pan veeeery smooth. On Roll i use a Spektrum H40 60. I just found out that MKV...

Try to take the potentiometer out of your camera Mount and dont touch it. I had also problems with jittering MKS 787. When i removed the P. From the mount it was O.K

Hey George and everybody else. After i changed the resistor on R2 ( now there is some solder/ 0Ohm) communication with Jeti Box is working. But when i connect a PC i see no changes , when i change something with the Box. For example I tried to change Roll Gain P ( is P/I/D the same like Prop./...

Hi everybody. Georges Tipp in Post 183 is working very well and it is quiet easy. George, It works also with the Jeti Box Mini. But i have one other question: When i switch on the Compass via Jeti Box Compass is on. I can see the behavior of the mount is changing. It starts to turn slightly. I...

Hi everybody. Does someone work with a Jeti Box and PL 3X ? I tried with the Jetibox mini and the old standart version, but it always says " waiting for device " . Its the same if i plug the box directly into PL or if i use the Telemetrie via Jeti RMK 2. Do you have different experience ...

Hi Is it possible to use a Jeti reciever on the WKM with external sensor To have some Telemetriedata? I would like to know how much mAH are already used. Jochen

Me to..... Thanks dave. Im thinking about moving to the DJI Systhem because Of the money for the MK license when you want to earn some money With flying. Its much more than buying the WMK M .... The only thing im Afraid of is that there is no telemetry like i have now with the Jeti . I would...

Hi Ken. Thanks for your answer. I wanted to use the Bl 2.0 because i have some of them lying around. Maybe a bad Idea. Wich one would you prefer for a Sky Jib 8 with plettenberg orbit 15 Motors? J.

Hi. Im thinking about buying a DJI WKM to build a Droidworx Sky Jib. Motors will be Plettenberg Orbit 15. Can anybody tell me if it is possilble to use the MK BL 2.0 ESC ? Does the WK M work on a big Okto ? I think i read something in any forum that there are problems with big Oktos and...