Search results

Thanks for all your answers. I was flying again today with a bit stronger wind. About 10- 23 kmh. putting the basic gain for nick and roll helped a bit. but changing from xoar 14/5 to cfk 12/6 made a big difference. It behaves much smoother now. Takes some more Amps ( about 80a hovering with 8...

Hi everybody. Im flying a Sky Jib 8 Frame, with WKM , Herkules 3 Boards, Plettenberg Orbit 15/20 Motors and Xoar 14/5 Props. When i did my first flights it was no wind at all. I set up all the Gains with potis on X2 and X3, with almost perfect results. Even Video shooting in GPS Mode was...

Hi everybody. Im flying a Sky Jib 8 Frame, with WKM , Herkules 3 Boards, Plettenberg Orbit 15/20 Motors and Xoar 14/5 Props. When i did my first flights it was no wind at all. I set up all the Gains with potis on X2 and X3, with almost perfect results. Even Video shooting in GPS Mode was...

Hi George . What do you think how long it takes to get a link to the new firmware ? And please try to be realistic.... regards Jochen

Any firmware news ???? :) Jochen

Hi everybody. Are there any News about the new Firmware release ? Regards Jochen

Hi njozsef. It was not really understandable , sorry :) Could you post a picture of your mounting position ? Warm Regards , jochen

Hi Ferdinand. Please let me know what kind of Motors ans ESC you are using with these big props. I have the Orbit 15 Plettenberg Motors ,and Plettenberg says max. 13/4 Props. Thanks for answering, jochen

Thanks for your answers. What kind of ESC do you use with the Hoverfly. I need for the Plettenbergs something with min. 60 A. Regards Jochen

Hi everybody. Im the owner of a Skyjib 8 with Plettenberg Orbit 15 Motors and Xoar 14/ 4 Props. Since there where some Problems with the Orbits , the BL 2.0 and big Props , I'm waiting for the Herkules 3 .But it takes really long....... Now i started to think about using the Wookong Systhem...

George, good to hear that there will be a new firmware with is more resistant against vibrations. Can you tell us a kind of time schedule when it will be available ? My Operator hates me since i told him that we will only fly with the Gyro until we get the new software.... Jochen

Hi George. Hope you will get well soon. I found out something new for me today. i always had some problems with small servo moves. especially when I'm flying fast. Servos are MKS hv 787 powered with 6v on a AV 200. When i switch of the Acc influence in the calibration tab i have no servo...

Hi krleas. Wich kopter and mount did you use? Your video looks really good. Any post stabilisation ? Regards from Hamburg. Jochen

Hi everybody. I have small movements on Nick and Roll all the time the motors are running.... Vibrations. I can see my AV 200 moving when i hold my copter absolutely still. Without motors running everything is fine. When i switch picloc off the video looks good. So it looks like i have not too...

Hi Achta. Looks very smooth . Is it the new firmware ? Wich servos do you use ? Jochen

Found a thread in the german MK Forum where someone is looking for Beta Testers for the new firmware. http://forum.mikrokopter.de/topic-post381930.html#post381930 Post 38

The servo outputs on the FC works only after calibrating the gyros ( stick up and left ).

Another problem . I have a small servo for moving the video antenna up and down. Its on Pl as servo 5. Now the servo way is only about 10 degree. Earlier it was about 110 degree. George , Is it possibel to change the servo resolution for every servo?

George, I played with the different proportional settings, but there was no effect. My Av 200 only traveles 3mm to the legt and right , while stabilisation works all the way. Is it also because of the new servo resolution that my slew servos wont go fast any more ? Jochen

Hi everybody. Today i made the update to the latest firmware. Looks fine so far, but i have a very small range on Roll with the manual stick control. When the mount is stabilizing the range is fine. It travels the whole way from one side to the other. Roll is in proporional mode and with my...